Valentine Style 1 tutorial

 

Langkah 1:

Match two TOP pieces RIGHT SIDES together lining up the pleats.

Fold the pleats through both layers together and pin in place.

Pin and stitch the shoulder seam allowance. Pencet.

Repeat for the remaining two TOP pieces.

 

Langkah 2:

Open up the TOP pieces RIGHT SIDE up.

Apply bias binding to the centre back and armhole seam allowances.
pin and stitch binding RIGHT SIDES together.
trim seam allowance to the finished binding width. Clip armhole seam allowance.
Press the seam.
Finish the binding by turning the un-sewn raw edge to the inside and matching the fold to the stitch line. Top stitch in place.

 

Langkah 3:

With the two TOP pieces RIGHT SIDES together, pin, stitch and finish the side seam allowance.

Repeat for the other two TOP pieces.

 

Langkah 4:

Lay WAISTBAND 1 Sisih tengen bebarengan karo WAISTBAND 2. Jahit tunjangan jahitan nganti spidol. Melu lan pencet WAISTBAND ing setengah lengthways, siap nglamar.

 

Langkah 5:

Follow the tutorial for the skirt or trousers if you are wanting to make the dress or jumpsuit.

Match the waistlines of the TOP pieces together. Alternate how you overlap them, so if the lefthand front piece is in front of the righthand front piece, the lefthand back piece is behind the righthand back piece.

TOP
Match the centre front and back of the TOP to the WAISTBAND. Pin lan nggawe ing Panggonan. Finish the seam allowance and press.

DRESS/JUMPSUIT
Atur ing bagean TOP lorone RIGHT bebarengan karo clono dowo lan waistband. Match side seams and centre front and back points.

Pin lan nggawe ing Panggonan. Finish the seam allowance and press.

 

Langkah 6:

Tempelake TIE dadi setengah ing sisih tengen sing dawane bebarengan. Selehake dawa senar ing antarane. Jahit ing sisih ndhuwur kanggo ngamanake senar menyang TIE. Pin lan jahitan sangu jahitan. Tarik tali kasebut kanthi ati-ati kanthi ngowahi SISI KANAN.

Yen sampeyan duwe turner daur ulang:
Melu TIE ing setengah lengthways lan jahitan sangu jahitan. Nguripake lorone RIGHT metu nggunakake turner lapisan.

Rampungake TIE kanthi mencet lan ngowahi ujung mentah ing ngisor kaping pindho lan gunakake jahitan cilik kanggo ngamanake. Pasang menyang waistband kanggo ngrampungake.

Yen sampeyan duwe lampiran binder, sampeyan bisa nggunakake jahitan zig-zag kanggo nggawe dasi..