STEP 1:
모든 패턴 조각을 잘라.
Lay the main fabric and lining fabric RIGHT SIDES together of the bottoms.
Pin together. Stitch using zig-zag stitch or a stretch stitch on an overlocker.
Ensure to leave open the section for turning right sides out later.
트림 시접.
STEP 2:
밖으로 오른쪽 측면을 돌립니다.
Fold the seam allowances of the open section to the inside and sew using small whip stitches by hand.
STEP 3:
Fold the TIE LOOPS in half following the dashed line on the pattern piece.
Sew the seam allowance.
내부 중앙에 솔기 라인에서 오른쪽을 돌려.
STEP 4:
Lay the FRONT TOP main fabric and lining fabric RIGHT SIDES.
Pin together. 땀.
Ensure to leave open the section for turning right sides out later and also the openings for the TIE LOOPS.
트림 시접.
STEP 5:
Fold the TIE LOOPS in half lengthways matching the raw seam allowances. Insert the TIE LOOPS into the FRONT of the swimsuit, 내부 및 외부 직물 사이.
Pin and stitch the seam allowances.
STEP 6:
Pull the swimsuit RIGHT SIDES out through the open sections on the top and bottoms.
내부 개구의 심 수당을 접어. 작은 사용하여 보안, whip stitches.
STEP 7:
There are 3 options for completing the TIES.
선택권 1: Fold the TIE in half along its length RIGHT SIDES together. Place a length of string in-between. Sew across the top to secure the string to the TIE. Pin and sew the seam allowance. Carefully pull the string turning the TIE RIGHT SIDES out.
선택권 2: 당신은 루프 터너가있는 경우:
Fold the TIE in half lengthways and sew the seam allowance. 심 터너를 사용하여 오른쪽을 돌려.
선택권 3: If you have a binder attachment you can use it with zig-zag stitch to create your ties.
Finish the TIE by turning the raw ends under twice and use small stitches to secure or by making a knot at each end. Insert one into each TIE LOOP to complete.