단계 1:
Use the largest stitch on your machine and sew a row within the seam allowances of the shoulder and waistline on the TOP FRONT and BACK pieces. Sew between the facing marks on the FRONT pieces and between the facing and neckline marks on the BACK.
단계 2:
Gather the shoulder seam allowances of the FRONT and BACK pieces to 17cm.
Match the FRONT and BACK pieces RIGHT SIDES together. 핀과 어깨 솔기 스티치. Finish the seam allowances using zig zag stitch or an overlocker. Press the seam toward the back.
Fold back the facings and press. You may like to hem stitch the facing to the inside of the garment if it won’t stay flat.
Pro tip: use french seam finishing for sturdy and tidy seams.
단계 3:
Open up the TOP piece RIGHT SIDES up.
Top stitch the seam allowance flat to secure.
단계 4:
Lay WAISTBAND 1 RIGHT SIDES together with WAISTBAND 2. Sew the seam allowances up to the markers. Fold and press the WAISTBAND in half lengthways, ready to apply.
단계 5:
Gather the waistline of the TOP pieces to fit the WAISTBAND.
Match the central and side seam points together. Overlap the TOP pieces by 2cm at the side and central points.
Ensure to pin the openings on the WAISTBAND carefully so they lay neatly when stitched.
단계 6:
TIE를 오른쪽 길이를 따라 반으로 접습니다.. 사이에 끈을 길게 끼우세요. 끈을 TIE에 고정하기 위해 윗부분을 바느질하세요.. 솔기 여유분을 고정하고 바느질하세요. 오른쪽 묶음을 바깥쪽으로 돌리면서 끈을 조심스럽게 당깁니다..
당신은 루프 터너가있는 경우:
TIE를 세로로 반 접어서 시접을 재봉하세요. 심 터너를 사용하여 오른쪽을 돌려.
Finish the TIE by pressing it and turning the raw ends under twice and use small stitches to secure. Or simply tie a knot at each end. 완료하기 위해 허리 밴드에 삽입.
바인더 부착물이 있는 경우 지그재그 스티치와 함께 사용하여 넥타이를 만들 수 있습니다..
단계 7:
FOR THE JUMPSUIT OR DRESS
Follow the tutorial to make the SKIRT or TROUSERS.
Match the centre front, back and side seams of the TOP and SKIRT or TROUSER RIGHT SIDES together.
핀과 스티치. 심 수당을 완료.
상단
Complete by creating and inserting the tie.