단계 1:
모든 패턴 조각을 잘라.
With the TOP pieces RIGHT SIDES together, pin and stitch the side seam allowances.
Finish the seam allowance of the top edge using an overlocking stitch or zig-zag. Fold back the top edge 2.5cm and press.
Mark and fold the pleats – making sure to mark with the side seams in the centre, 스티치를 누르십시오.
단계 2:
Match each front pleat to its corresponding back pleat.
Sew across the join using a tight zig zag stitch.
단계 3:
Prepare the SHOULDER BINDING by folding and pressing the seam allowances to the WRONG SIDE.
Prepare the TOP shoulders by folding the fabric downwards at an angle toward the WRONG SIDE, creating more pleats.
단계 4:
Finish the shoulder by encasing the TOP shoulders inside the SHOULDER BINDING.
Secure the edges of the SHOULDER BINDING with small hand stitches to secure in place.
단계 5:
Lay WAISTBAND 1 RIGHT SIDES together with WAISTBAND 2. Sew the seam allowances up to the markers. Fold and press the WAISTBAND in half lengthways, ready to apply.
단계 6:
Gather the waistline of the TOP to fit the WAISTBAND.
An easy way to do this is to sew a row of straight stitch on the longest stitch setting, wrap one thread end around a needle then gently pull the other end to gather. Secure the second thread end to the pin.
Pin and stitch the WAISTBAND to the TOP matching the centre front and back points. If you intend to make the dress or jumpsuit, sew just within the 1.5cm seam allowance.
단계 7:
FOR THE JUMPSUIT OR DRESS
Follow the tutorial to make the SKIRT or TROUSERS.
Match the centre front, back and side seams of the TOP and SKIRT or TROUSER RIGHT SIDES together.
핀과 스티치. 심 수당을 완료.
단계 8:
TIE를 오른쪽 길이를 따라 반으로 접습니다.. 사이에 끈을 길게 끼우세요. 끈을 TIE에 고정하기 위해 윗부분을 바느질하세요.. 솔기 여유분을 고정하고 바느질하세요. 오른쪽 묶음을 바깥쪽으로 돌리면서 끈을 조심스럽게 당깁니다..
당신은 루프 터너가있는 경우:
TIE를 세로로 반 접어서 시접을 재봉하세요. 심 터너를 사용하여 오른쪽을 돌려.
Finish the TIE by pressing it and turning the raw ends under twice and use small stitches to secure. 완료하기 위해 허리 밴드에 삽입.
바인더 부착물이 있는 경우 지그재그 스티치와 함께 사용하여 넥타이를 만들 수 있습니다..