단계 1:
Match two TOP pieces RIGHT SIDES together lining up the pleats.
Fold the pleats through both layers together and pin in place.
Pin and stitch the shoulder seam allowance. 프레스.
Repeat for the remaining two TOP pieces.
단계 2:
Open up the TOP pieces RIGHT SIDE up.
Apply bias binding to the centre back and armhole seam allowances.
pin and stitch binding RIGHT SIDES together.
trim seam allowance to the finished binding width. Clip armhole seam allowance.
Press the seam.
Finish the binding by turning the un-sewn raw edge to the inside and matching the fold to the stitch line. Top stitch in place.
단계 3:
With the two TOP pieces RIGHT SIDES together, pin, stitch and finish the side seam allowance.
Repeat for the other two TOP pieces.
단계 4:
Lay WAISTBAND 1 RIGHT SIDES together with WAISTBAND 2. Sew the seam allowances up to the markers. Fold and press the WAISTBAND in half lengthways, ready to apply.
단계 5:
Follow the tutorial for the skirt or trousers if you are wanting to make the dress or jumpsuit.
Match the waistlines of the TOP pieces together. Alternate how you overlap them, so if the lefthand front piece is in front of the righthand front piece, the lefthand back piece is behind the righthand back piece.
상단
Match the centre front and back of the TOP to the WAISTBAND. 장소에 핀과 스티치. Finish the seam allowance and press.
DRESS/JUMPSUIT
바지와 허리 밴드와 함께 TOP 부분을 우측 정렬. Match side seams and centre front and back points.
장소에 핀과 스티치. Finish the seam allowance and press.
단계 6:
TIE를 오른쪽 길이를 따라 반으로 접습니다.. 사이에 끈을 길게 끼우세요. 끈을 TIE에 고정하기 위해 윗부분을 바느질하세요.. 솔기 여유분을 고정하고 바느질하세요. 오른쪽 묶음을 바깥쪽으로 돌리면서 끈을 조심스럽게 당깁니다..
당신은 루프 터너가있는 경우:
TIE를 세로로 반 접어서 시접을 재봉하세요. 심 터너를 사용하여 오른쪽을 돌려.
Finish the TIE by pressing it and turning the raw ends under twice and use small stitches to secure. 완료하기 위해 허리 밴드에 삽입.
바인더 부착물이 있는 경우 지그재그 스티치와 함께 사용하여 넥타이를 만들 수 있습니다..