Fido Sweater Tutorial

STEP 1:

Skip this step if you plan to not use the HOOD:

Lay pariyên HOOD SIDES MAFÊ bi hev re. Pin û dirûnê li derdora navenda dîsa alîkariya kûpekî.

Ensure to use a ballpoint jersey machine needle.

STEP 2:

Take the HEM CUFF, fold it in half lengthways and stitch the seam allowance to form a complete loop.

If you are not adding the hood, repeat this step for the NECKLINE CUFF.

STEP 3:

Fold the SLEEVE CUFF in half along its width.

Ease onto the end of the SLEEVE. Pin û stitch.

STEP 4:

Repeat STEP 3 for the HOOD CUFF.

Skip this Step if you are not using the HOOD.

STEP 5:

Match the shoulder seams of the BACK and FRONT RIGHT SIDES together.

Pin û stitch li cihê.

STEP 6:

Open up the FRONT and BACK RIGHT SIDES towards you.

Ease the SLEEVE head on to the arm opening. Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK. Pin to the underarm points of the side seams and the center of the SLEEVE head to the shoulder point. Ease the rest in.

Stitch and finish the seam allowance using zig zag stitch or an overlocker.

STEP 7:

Bi kincê SIDES xelet derve, lay the FRONT and BACK RIGHT SIDES together.

Pin, stitch, trim and finish from the SLEEVE CUFF to the hem along the side seam.

STEP 8:

WITH HOOD:
Rahêje HOOD. PAJKê beşên Cuff tikandinê de hev û din.

Match ber navenda û navenda xalên pişta HOOD ji FRONT û beşên BACK. Ma ev bi folding bi xiftanê li nîv û got, pin bi boneya xalên. Dubare ji bo HOOD wê pin hev bi hev re.

Pin û stitch li cihê.

WITHOUT HOOD:
Apply the NECKLINE CUFF by folding in half along the width then easing around the neckline. Pin û stitch li cihê.

STEP 9:

Apply the HEM CUFF by folding in half along the width and easing around the hemline. Pin û stitch li cihê.