КАДАМ 1:
HOOD колдонбоону пландап жатсаңыз, бул кадамды өткөрүп жибериңиз:
КАПКАН бөлүктөрүн ОҢ ТАРАПТАРЫНА бириктириңиз. Pin and stitch around the center back seam allowance.
Ensure to use a ballpoint jersey machine needle.
КАДАМ 2:
Take the HEM CUFF, fold it in half lengthways and stitch the seam allowance to form a complete loop.
If you are not adding the hood, repeat this step for the NECKLINE CUFF.
КАДАМ 3:
ЖЕҢ МЕНЖЕТТИ туурасы боюнча экиге бүктүңүз.
Ease onto the end of the SLEEVE. Pin жана Кокетка.
КАДАМ 4:
Repeat STEP 3 for the HOOD CUFF.
Skip this Step if you are not using the HOOD.
КАДАМ 5:
Match the shoulder seams of the BACK and FRONT RIGHT SIDES together.
Кадап жана ордунда тигип.
КАДАМ 6:
Open up the FRONT and BACK RIGHT SIDES towards you.
Ease the SLEEVE head on to the arm opening. Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK. Pin to the underarm points of the side seams and the center of the SLEEVE head to the shoulder point. Ease the rest in.
Stitch and finish the seam allowance using zig zag stitch or an overlocker.
КАДАМ 7:
Кийимдин ЖАҢЫЛЫ ТАРАПтары сыртка чыгып, lay the FRONT and BACK RIGHT SIDES together.
төөнөч, Эки шляпа бөлүктөрү ОҢ ТАРАПТАР менен бирге, trim and finish from the SLEEVE CUFF to the hem along the side seam.
КАДАМ 8:
WITH HOOD:
Take the HOOD. Overlap CUFF sections onto each other.
Match center front and center back points of the HOOD to the FRONT and BACK sections. Do this by folding the garment in half and adding pins to mark the points. Repeat for the HOOD then match the pins together.
Кадап жана ордунда тигип.
WITHOUT HOOD:
Apply the NECKLINE CUFF by folding in half along the width then easing around the neckline. Кадап жана ордунда тигип.
КАДАМ 9:
Apply the HEM CUFF by folding in half along the width and easing around the hemline. Кадап жана ордунда тигип.