Пенни свитер окуу куралы

КАДАМ 1:

бардык үлгү даана кесип.
ЖЕҢ МЕНЖЕТТИ туурасы боюнча экиге бүктүңүз. Match the raw edges of the folded CUFF to the SLEEVE.

Ease (stretch the CUFF enough to reach from side to side) onto the end of the SLEEVE. Pin жана Кокетка.

КАДАМ 2:

Take the HEM CUFF and NECKLINE CUFF (refer to Step 5 if you are using the NECK WARMER CUFF) жана үзгүлтүксүз илмек түзүү үчүн, ОҢ ТАРАПТАРЫН экиге бүктүңүз. Кыска тигиш жерлерин кадап, тигип.

КАДАМ 3:

Match the back of the SLEEVE to the BACK RIGHT SIDES TOGETHER.

Кадап жана ордунда тигип.

КАДАМ 4:

Match the FRONT to the front side of the SLEEVE. Pin and stitch as before.

Repeat STEP 3-4 for the other side of the garment.

КАДАМ 5:

Lay the FRONT and BACK RIGHT SIDES together, pin from the side seam from the SLEEVE CUFF down to the garment hem.

Stitch and finish the seam allowance.

Clip almost up to the seam allowance at the underarm point to allow the garment to lay flat once turned. If you have finished the seam allowance close to the body this may not be necessary

КАДАМ 6:

Кийимдин этегине HEM CUFF колдонуңуз, ОҢ ТАРАПТАР чогуу. Match the centre front and back points.

Бир калыпта тегеренип, анан кадап, тигип коюңуз.

оюк жөлөкпул аягына.

КАДАМ 7:

Skip to Step 10 if you are using the NECK WARMER or Step 13 for the NECKLINE CUFF.

КАПКАН бөлүктөрүн ОҢ ТАРАПТАРЫНА бириктириңиз. Тышкы тигиш сызыгынын тегерегине төөнөгүч жана тигиш.

КАДАМ 8:

HOOD CUFF алыңыз, аны эң узун тигиш жерлерине дал келүүчү экиге бүктүңүз. КАПКАНТЫН ачылышына кадап, тигип коюңуз.

КАДАМ 9:

Overlap the two seam allowances of the HOOD CUFF so one is behind then other. HOOD CUFFтин ортосун кийимдин алдыңкы ортосуна сүйкөңүз.

КАПКАНЫН орто арткы бөлүгүн кийимдин арткы ортосуна дал келтириңиз. Кадап жана тегерете сайгыла.

КАДАМ 10:

Fold the NECK WARMER CUFF in half along the centre fold line.

КАДАМ 11:

Sew the raw edges together.

КАДАМ 12:

Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.

Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. Pin жана Кокетка.

КАДАМ 13:

WITH NECKLINE CUFF
Fold the NECKLINE CUFF in half, matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, ОҢ ТАРАПТАР чогуу.

Кадап жана тигип, тигиш бөлүгүн бүтүрүңүз.