SCHRËTT 1:
Sprangen dëse Schrëtt wann Dir plangt den HOOD net ze benotzen:
Lay der HOOD Stécker RIGHT SEITEN zesummen. Pin and stitch around the center back seam allowance.
Ensure to use a ballpoint jersey machine needle.
SCHRËTT 2:
Huelt den HEM CUFF, fold it in half lengthways and stitch the seam allowance to form a complete loop.
If you are not adding the hood, repeat this step for the NECKLINE CUFF.
SCHRËTT 3:
Klappt den SLEEVE CUFF an der Halschent laanscht seng Breet.
Ease onto the end of the SLEEVE. Pin a Stitch.
SCHRËTT 4:
Widderhuelen SCHRËTT 3 for the HOOD CUFF.
Skip this Step if you are not using the HOOD.
SCHRËTT 5:
Match the shoulder seams of the BACK and FRONT RIGHT SIDES together.
Pin a Stitch am Plaz.
SCHRËTT 6:
Open up the FRONT and BACK RIGHT SIDES towards you.
Ease the SLEEVE head on to the arm opening. Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK. Pin to the underarm points of the side seams and the center of the SLEEVE head to the shoulder point. Ease the rest in.
Stitch and finish the seam allowance using zig zag stitch or an overlocker.
SCHRËTT 7:
Mat der gekleet problem Säiten eraus, leeën d'FRONT an BACK RIGHT SEITEN zesummen.
Pin, stitch, Trimmen a fäerdeg vum SLEEVE CUFF bis zum Saum laanscht d'Säitenaum.
SCHRËTT 8:
MAT Hood:
Take the HOOD. Overlap CUFF sections onto each other.
Match center front and center back points of the HOOD to the FRONT and BACK sections. Do this by folding the garment in half and adding pins to mark the points. Repeat for the HOOD then match the pins together.
Pin a Stitch am Plaz.
OUNI Hood:
Apply the NECKLINE CUFF by folding in half along the width then easing around the neckline. Pin a Stitch am Plaz.
SCHRËTT 9:
Apply the HEM CUFF by folding in half along the width and easing around the hemline. Pin a Stitch am Plaz.