STEP 1:
Suitable for fleece/jersey/towelling fabric
Turn the SLEEVE cuff back 1.5cm to the RIGHT SIDE, pēc tam atkal salokiet to atpakaļ par 3 cm.
Top stitch close to the edge on the RIGHT SIDE.
STEP 2:
Match the back SLEEVE armhole with the BACK, Labās puses kopā.
Pin un valdziņš. Finish with either an overlocker or zig-zag stitch. Apdares šuves pabalstu.
STEP 3:
Match the FRONT armhole with the front SLEEVE, Labās puses kopā.
tapa, dūriens un pabeigt kā iepriekš.
Atkārtojiet 1-2 par otras armhole.
STEP 4:
Likt priekšā labajā pusē kopā ar muguras, matching the side seam and SLEEVE seam allowances.
tapa, dūriens un apdare.
Saspiediet gandrīz līdz šuvju pielaidumam padušu vietā, lai ļautu apģērbam gulēt līdz galam, kad tas ir pagriezts. Ja esat pabeidzis šuvju pielaidi pie ķermeņa, tas var nebūt vajadzīgs
STEP 5:
Finish the garment hemline using your preferred finishing method.
Turn the hemline towards the WRONG SIDE 1.5cm.
Topstitch to secure.
STEP 6:
Fold the length of the COLLAR in half RIGHT SIDES together.
Pin and stitch the two shorter ends. Clip the corners and trim down to 5mm.
Pagrieziet labās puses out.
STEP 7:
Match the raw edges of the COLLAR around the garment opening.
tapa, dūriens un apdare.
Top stitch close to the seam from the RIGHT SIDE to secure the seam allowance flat.
STEP 8:
Lay the two WAISTBAND pieces RIGHT SIDES together.
Pin and stitch all around leaving a gap of approximately 10cm to turn right sides out.
Turn RIGHT SIDES out and press seams flat. Top stitch around the edges to hold flat and seal the 10cm opening.
Apply a piece of velcro to either side of the WAISTBAND at the ends, approximately 5cm long.
STEP 9:
Align the WAISTBAND with the underarm points.
Top stitch through the WAISTBAND and BACK to secure in place.