SOLIS 1:
Izgriezt visus modeli gabalu.
With the TOP pieces RIGHT SIDES together, pin and stitch the side seam allowances.
Finish the seam allowance of the top edge using an overlocking stitch or zig-zag. Fold back the top edge 2.5cm and press.
Mark and fold the pleats – making sure to mark with the side seams in the centre, dūriens un nospiediet.
SOLIS 2:
Match each front pleat to its corresponding back pleat.
Sew across the join using a tight zig zag stitch.
SOLIS 3:
Prepare the SHOULDER BINDING by folding and pressing the seam allowances to the WRONG SIDE.
Prepare the TOP shoulders by folding the fabric downwards at an angle toward the WRONG SIDE, creating more pleats.
SOLIS 4:
Finish the shoulder by encasing the TOP shoulders inside the SHOULDER BINDING.
Secure the edges of the SHOULDER BINDING with small hand stitches to secure in place.
SOLIS 5:
Noliec JOKSTI 1 LABĀS PUSES kopā ar JOKSTI 2. Šujiet šuvju pielaides līdz marķieriem. Salokiet un piespiediet vidukļa joslu gareniski uz pusēm, gatavs pieteikties.
SOLIS 6:
Gather the waistline of the TOP to fit the WAISTBAND.
An easy way to do this is to sew a row of straight stitch on the longest stitch setting, wrap one thread end around a needle then gently pull the other end to gather. Secure the second thread end to the pin.
Pin and stitch the WAISTBAND to the TOP matching the centre front and back points. If you intend to make the dress or jumpsuit, sew just within the 1.5cm seam allowance.
SOLIS 7:
KOMPONENTAM VAI KLEITAI
Follow the tutorial to make the SKIRT or TROUSERS.
Saskaņojiet centrālo priekšpusi, back and side seams of the TOP and SKIRT or TROUSER RIGHT SIDES together.
Pin un valdziņš. Finish šuvi pabalstu.
SOLIS 8:
Salieciet ŠAITI uz pusēm visā garumā LABĀS PUSES kopā. Novietojiet auklas garumu starp tām. Šujiet pāri augšai, lai piestiprinātu auklu pie TIE. Piespraudiet un izšujiet šuves piemaksu. Uzmanīgi pavelciet auklu, pagriežot kaklasaites LABĀS PUSES.
Ja jums ir cilpa virpotājs:
Salokiet TIE gareniski uz pusēm un izšujiet šuves piemaksu. Turn labajā pusē, izmantojot šuves virpotājs.
Pabeidziet TIE, piespiežot to un divreiz pagriežot neapstrādātos galus, un izmantojiet nelielas šuves, lai nostiprinātu. Ievietojiet jostas, lai pabeigtu.
Ja jums ir stiprinājuma stiprinājums, varat to izmantot ar zigzaga dūrienu, lai izveidotu saites.