SOLIS 1:
Match two TOP pieces RIGHT SIDES together lining up the pleats.
Fold the pleats through both layers together and pin in place.
Pin and stitch the shoulder seam allowance. prese.
Repeat for the remaining two TOP pieces.
SOLIS 2:
Open up the TOP pieces RIGHT SIDE up.
Apply bias binding to the centre back and armhole seam allowances.
pin and stitch binding RIGHT SIDES together.
trim seam allowance to the finished binding width. Clip armhole seam allowance.
Press the seam.
Finish the binding by turning the un-sewn raw edge to the inside and matching the fold to the stitch line. Top stitch in place.
SOLIS 3:
With the two TOP pieces RIGHT SIDES together, tapa, stitch and finish the side seam allowance.
Repeat for the other two TOP pieces.
SOLIS 4:
Noliec JOKSTI 1 LABĀS PUSES kopā ar JOKSTI 2. Šujiet šuvju pielaides līdz marķieriem. Salokiet un piespiediet vidukļa joslu gareniski uz pusēm, gatavs pieteikties.
SOLIS 5:
Follow the tutorial for the skirt or trousers if you are wanting to make the dress or jumpsuit.
Match the waistlines of the TOP pieces together. Alternate how you overlap them, so if the lefthand front piece is in front of the righthand front piece, the lefthand back piece is behind the righthand back piece.
TOPS
Match the centre front and back of the TOP to the WAISTBAND. Pin un dūrienu vietā. Finish the seam allowance and press.
DRESS/JUMPSUIT
Arrange the TOP sections RIGHT SIDES together with the TROUSERS and WAISTBAND. Match side seams and centre front and back points.
Pin un dūrienu vietā. Finish the seam allowance and press.
SOLIS 6:
Salieciet ŠAITI uz pusēm visā garumā LABĀS PUSES kopā. Novietojiet auklas garumu starp tām. Šujiet pāri augšai, lai piestiprinātu auklu pie TIE. Piespraudiet un izšujiet šuves piemaksu. Uzmanīgi pavelciet auklu, pagriežot kaklasaites LABĀS PUSES.
Ja jums ir cilpa virpotājs:
Salokiet TIE gareniski uz pusēm un izšujiet šuves piemaksu. Turn labajā pusē, izmantojot šuves virpotājs.
Pabeidziet TIE, piespiežot to un divreiz pagriežot neapstrādātos galus, un izmantojiet nelielas šuves, lai nostiprinātu. Ievietojiet jostas, lai pabeigtu.
Ja jums ir stiprinājuma stiprinājums, varat to izmantot ar zigzaga dūrienu, lai izveidotu saites.