Hīkoi 1:
Suitable for fleece/jersey/towelling fabric
Turn the SLEEVE cuff back 1.5cm to the RIGHT SIDE, ka kooruatia ano kia 3cm.
Top stitch close to the edge on the RIGHT SIDE.
Hīkoi 2:
Match the back SLEEVE armhole with the BACK, tahi Tuhinga RIGHT.
Pin me tuitui. Finish with either an overlocker or zig-zag stitch. Trim the seam allowance.
Hīkoi 3:
Match the FRONT armhole with the front SLEEVE, tahi Tuhinga RIGHT.
Pin, stitch and finish as before.
Repeat Steps 1-2 for the other armhole.
Hīkoi 4:
Takoto te mua RIGHT Tuhinga tahi ki te MURI, matching the side seam and SLEEVE seam allowances.
Pin, stitch and finish.
Tope tata ki runga ki te tahua tui i te pito o raro kia noho papa te kakahu ina huri ana. Mena kua oti i a koe te tahua tui tata ki te tinana kaore pea e tika
Hīkoi 5:
Finish the garment hemline using your preferred finishing method.
Turn the hemline towards the WRONG SIDE 1.5cm.
Topstitch to secure.
Hīkoi 6:
Fold the length of the COLLAR in half RIGHT SIDES together.
Pin and stitch the two shorter ends. Clip the corners and trim down to 5mm.
Tahuri Tuhinga RIGHT i roto i.
Hīkoi 7:
Match the raw edges of the COLLAR around the garment opening.
Pin, stitch and finish.
Top stitch close to the seam from the RIGHT SIDE to secure the seam allowance flat.
Hīkoi 8:
Lay the two WAISTBAND pieces RIGHT SIDES together.
Pin and stitch all around leaving a gap of approximately 10cm to turn right sides out.
Turn RIGHT SIDES out and press seams flat. Top stitch around the edges to hold flat and seal the 10cm opening.
Apply a piece of velcro to either side of the WAISTBAND at the ends, approximately 5cm long.
Hīkoi 9:
Align the WAISTBAND with the underarm points.
Top stitch through the WAISTBAND and BACK to secure in place.