Hīkoi 1:
Whakatakotoria nga wahi kara e rua i nga taha matau.
Tuhia te tahua tui ka waiho kia tuwhera te tui o te kaki.
CLIP me TRIM te tahua tui.
Hurihia nga taha matau ki waho ka pehi. Tuia runga huri noa kia tata ki te tapa.
Hīkoi 2:
Lay the two BACK pieces RIGHT SIDES TOGETHER. Place the COLLAR between the two BACK pieces at the neckline.
Pin in place. Stitch all around as shown in the diagram leaving a 10cm gap unstitched on one side.
Clip and trim the seam allowance as in Step 1 but leave the 10cm seam allowance un-clipped or trimmed.
Turn RIGHT SIDES OUT and press gently using a pressing cloth is necessary. Fold the 10cm opening seam allowance to the inside.
Top-stitch all around the garment.
Hīkoi 3:
Lay the WAISTBAND pieces RIGHT SIDES TOGETHER.
Pin and stitch leaving a 10cm gap open on one side.
Clip and trim as in Step 2.
Hīkoi 4:
Turn WAISTBAND RIGHT SIDES OUT. Fold the 10cm opening seam allowance to the inside. Press gently and top stitch.
Hīkoi 5:
Align the waistband center along the line indicated on the BACK pattern piece.
Apply a single row of stitches approximately 10cm long to the WAISTBAND to secure to the BACK of the garment.
Hīkoi 6:
Complete by adding the velcro to the neck bands and the waistband ends. Sew the softer part of the velcro to the lining pieces to help avoid the coarser part getting tangled in your pets fur.
Tuia a tawhio noa te roto o nga wahi velcro kia mau tonu.
Finally, add your buttons to the waistband to complete your smart Jasper Jacket!