Kamilah poraka Tutorial
E wātea ana i roto i te download tauira Images.
Tapahia atu nga mongamonga katoa tauira.
Lay the FRONT RIGHT SIDES together with the BACK along the shoulder seam.
Titi, me te tuitui i roto i te wahi.
Ensure to use a ballpoint jersey machine needle.
Matarere te Sleeve soté i te hawhe me tona whanui.
Whakatākupe ki te mutunga o te ringaringa. Pin me tuitui.
Open up the FRONT and BACK RIGHT SIDES towards you.
Ease the SLEEVE head on to the arm opening. Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK. Pin to the underarm points of the side seams and the center of the SLEEVE head to the shoulder point. Ease the rest in.
Stitch and finish the seam allowance using zig zag stitch or an overlocker.
With the garment WRONG SIDES out, lay the FRONT and BACK RIGHT SIDES together.
Pin, tuitui, trim and finish from the SLEEVE CUFF to the hem along the side seam.
Take the HEM CUFF and NECKLINE CUFF (refer to Step 5 if you are using the NECK WARMER CUFF) and fold in half RIGHT SIDES together to create a continuous loop. Pin and stitch the short seam allowances.
WITH NECKLINE CUFF
Fold the NECKLINE CUFF in half matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, tahi Tuhinga RIGHT.
Pin and stitch in place and finish the seam allowance.
Fold the NECK WARMER CUFF in half along the centre fold line.
Sew the raw edges together.
Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.
This is attached the same way as the NECKLINE CUFF as shown in Step 6.
Apply the HEM CUFF to the garment hem, tahi Tuhinga RIGHT.
Ease around evenly then pin and stitch in place.
Finish the seam allowance.