STEP 1:
1.5tahua cm tui ngā
Tapahia atu nga mongamonga katoa tauira. Ka pai ake te tuitui o nga CUFFS mena ka mahia mai i te reeti.
Purihia nga CUFFS WAEWAE kia haurua te roa. Whakatauritehia nga tapa mata o tetahi ki era o MUA 1, tahi Tuhinga RIGHT.
Titi, me te tuitui i roto i te wahi. Tukurua mō mua 2.
Whakamahia tuitui Paparoa-Kōpikopiko atu tuitui totoro ranei puta noa i tenei kaupapa. whakarite hoki ki te whakamahi i te ngira mīhini pura poraka.
STEP 2:
With FRONT 1 over FRONT 2 with both parts RIGHT SIDES up, align either end of the cuffs on FRONT 1 with the markers on FRONT 2.
Pin in place.
STEP 3:
mua takoto 1 & 2 Tuhinga RIGHT tahi ki te MURI. Pin the side seam allowances together, removing the pins at the join of FRONT 1 & 2 and replacing to secure through all pieces.
Stitch in place. Repeat for the opposite side.
STEP 4:
Take the HEM CUFF and NECKLINE CUFF (if using) and fold in half RIGHT SIDES together to create a continuous loop. Pin and stitch the short seam allowances.
Skip to step 10 for neck warmer or step 13 for hood.
STEP 5:
Fold the NECKLINE CUFF in half matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, tahi Tuhinga RIGHT.
Pin and stitch in place and finish the seam allowance.
STEP 6:
Apply the HEM CUFF to the garment hem, tahi Tuhinga RIGHT.
Ease around evenly then pin and stitch in place.
Finish the seam allowance.
STEP 7:
USING THE NECK WARMER
Fold the NECK WARMER CUFF in half along the centre fold line.
STEP 8:
Sew the raw edges together.
STEP 9:
Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.
Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. Pin me tuitui.
STEP 10:
Takoto tahi nga mongamonga Hood Tuhinga RIGHT. Pin and stitch around the outside seam line.
STEP 11:
Take the HOOD CUFF, fold it in half matching the longest seam allowances. Pin and stitch to the HOOD opening.
STEP 12:
Overlap the two seam allowances of the HOOD CUFF so one is behind the other. Apply the centre of the HOOD CUFF to the centre front of the garment.
Match the centre back of the HOOD with the centre back of the garment. Pin and stitch around.