Упатство за Kylo Tee

ЧЕКОР 1:

1.5додаток cm споеви вклучени
Исечете ги сите парчиња на модел. The CUFFS will sew better if made from jersey.

Fold the LEG CUFFS in half lengthways. Match the raw edges of one with those of FRONT 1, Десно страни заедно.

Игла и конец во место. Повторете го истото за ПРЕД 2.

Користете цик-цак бод или други се водат бод текот на овој проект. Исто така се обезбеди да се користи игла химикалка дрес машина.

ЧЕКОР 2:

со Преден 1 over FRONT 2 with both parts RIGHT SIDES up, align either end of the cuffs on FRONT 1 with the markers on FRONT 2.

Пински во место.

ЧЕКОР 3:

Леј ПРЕД 1 & 2 Десно страни заедно со задниот. Pin the side seam allowances together, removing the pins at the join of FRONT 1 & 2 and replacing to secure through all pieces.

Stitch in place. Repeat for the opposite side.

ЧЕКОР 4:

Take the HEM CUFF and NECKLINE CUFF (if using) and fold in half RIGHT SIDES together to create a continuous loop. Pin and stitch the short seam allowances.

Skip to step 10 for neck warmer or step 13 for hood.

ЧЕКОР 5:

Fold the NECKLINE CUFF in half matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, Десно страни заедно.

Pin and stitch in place and finish the seam allowance.

ЧЕКОР 6:

Apply the HEM CUFF to the garment hem, Десно страни заедно.

Ease around evenly then pin and stitch in place.

Завршете го додатокот за шевовите.

ЧЕКОР 7:

USING THE NECK WARMER
Fold the NECK WARMER CUFF in half along the centre fold line.

ЧЕКОР 8:

Sew the raw edges together.

ЧЕКОР 9:

Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.

Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. Игла и конец.

ЧЕКОР 10:

Леј HOOD парчиња десната страна заедно. Pin and stitch around the outside seam line.

ЧЕКОР 11:

Take the HOOD CUFF, fold it in half matching the longest seam allowances. Pin and stitch to the HOOD opening.

 

ЧЕКОР 12:

Overlap the two seam allowances of the HOOD CUFF so one is behind the other. Apply the centre of the HOOD CUFF to the centre front of the garment.

Match the centre back of the HOOD with the centre back of the garment. Pin and stitch around.