ЧЕКОР 1:
Cut out all pattern pieces.
With the TOP pieces RIGHT SIDES together, pin and stitch the side seam allowances.
Finish the seam allowance of the top edge using an overlocking stitch or zig-zag. Fold back the top edge 2.5cm and press.
Mark and fold the pleats – making sure to mark with the side seams in the centre, stitch and press.
ЧЕКОР 2:
Match each front pleat to its corresponding back pleat.
Sew across the join using a tight zig zag stitch.
ЧЕКОР 3:
Prepare the SHOULDER BINDING by folding and pressing the seam allowances to the WRONG SIDE.
Prepare the TOP shoulders by folding the fabric downwards at an angle toward the WRONG SIDE, creating more pleats.
ЧЕКОР 4:
Finish the shoulder by encasing the TOP shoulders inside the SHOULDER BINDING.
Secure the edges of the SHOULDER BINDING with small hand stitches to secure in place.
ЧЕКОР 5:
Поставете ПОМОК 1 ДЕСНИ СТРАНИ заедно со ПОМОК 2. Зашијте ги шевовите до маркерите. Преклопете го и притиснете го ПОМОК на половина по должина, подготвени да аплицираат.
ЧЕКОР 6:
Gather the waistline of the TOP to fit the WAISTBAND.
An easy way to do this is to sew a row of straight stitch on the longest stitch setting, wrap one thread end around a needle then gently pull the other end to gather. Secure the second thread end to the pin.
Pin and stitch the WAISTBAND to the TOP matching the centre front and back points. If you intend to make the dress or jumpsuit, sew just within the 1.5cm seam allowance.
ЧЕКОР 7:
ЗА КОМБИНЕЦ ИЛИ ФУСТАН
Follow the tutorial to make the SKIRT or TROUSERS.
Поврзете го централниот преден дел, back and side seams of the TOP and SKIRT or TROUSER RIGHT SIDES together.
Игла и конец. Завршете го додатокот за шевовите.
ЧЕКОР 8:
Свиткајте ја вратоврската на половина по должината ДЕСНИТЕ СТРАНИ заедно. Поставете должина на конец помеѓу. Зашијте го горниот дел за да ја прицврстите врвката на вратоврска. Закачете го и зашијте го додатокот за шевовите. Внимателно извлечете ја врвката вртејќи ја ДЕСНИТЕ СТРАНИ НА ВРАТИВКАТА.
Ако имате телефонска линија стругар:
Преклопете ја вратоврската на половина по должина и зашијте ја шивата. Свртете десно страни со помош на жица стругар.
Завршете ја вратоврската со притискање и свртување на необработените краеви двапати под и употребете мали шевови за прицврстување. Вметни во корселе да се заврши.
Ако имате додаток за врзивно средство, можете да го користите со цик-цак бод за да ги креирате вашите вратоврски.