АЛХАМ 1:
Хэрэв та HOOD ашиглахгүй гэж бодож байгаа бол энэ алхамыг алгасах хэрэгтэй:
Lay the HOOD pieces RIGHT SIDES together. Pin and stitch around the center back seam allowance.
Ensure to use a ballpoint jersey machine needle.
АЛХАМ 2:
Take the HEM CUFF, fold it in half lengthways and stitch the seam allowance to form a complete loop.
If you are not adding the hood, repeat this step for the NECKLINE CUFF.
АЛХАМ 3:
Ханцуйны ханцуйвчийг өргөнийх нь дагуу хагасаар нугалав.
Ease onto the end of the SLEEVE. Pin ба Stitch.
АЛХАМ 4:
Repeat STEP 3 for the HOOD CUFF.
Skip this Step if you are not using the HOOD.
АЛХАМ 5:
Match the shoulder seams of the BACK and FRONT RIGHT SIDES together.
Зүү ба оёж байрлуул.
АЛХАМ 6:
Open up the FRONT and BACK RIGHT SIDES towards you.
Ease the SLEEVE head on to the arm opening. Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK. Pin to the underarm points of the side seams and the center of the SLEEVE head to the shoulder point. Ease the rest in.
Stitch and finish the seam allowance using zig zag stitch or an overlocker.
АЛХАМ 7:
With the garment WRONG SIDES out, lay the FRONT and BACK RIGHT SIDES together.
Pin, оёдол, trim and finish from the SLEEVE CUFF to the hem along the side seam.
АЛХАМ 8:
WITH HOOD:
Take the HOOD. Overlap CUFF sections onto each other.
Match center front and center back points of the HOOD to the FRONT and BACK sections. Do this by folding the garment in half and adding pins to mark the points. Repeat for the HOOD then match the pins together.
Зүү ба оёж байрлуул.
WITHOUT HOOD:
Apply the NECKLINE CUFF by folding in half along the width then easing around the neckline. Зүү ба оёж байрлуул.
АЛХАМ 9:
Apply the HEM CUFF by folding in half along the width and easing around the hemline. Зүү ба оёж байрлуул.