АЛХАМ 1:
бүх хэв маяг ширхэг хайчилж.
Lay the main fabric and lining fabric RIGHT SIDES together of the bottoms.
Pin together. Stitch using zig-zag stitch or a stretch stitch on an overlocker.
Ensure to leave open the section for turning right sides out later.
Trim seam allowances.
АЛХАМ 2:
Turn RIGHT SIDES out.
Fold the seam allowances of the open section to the inside and sew using small whip stitches by hand.
АЛХАМ 3:
Fold the TIE LOOPS in half following the dashed line on the pattern piece.
Sew the seam allowance.
дотоод төв рүү давхарга шугамын хамт ЗӨВ талыг Turn.
АЛХАМ 4:
Lay the FRONT TOP main fabric and lining fabric RIGHT SIDES.
Pin together. Stitch.
Ensure to leave open the section for turning right sides out later and also the openings for the TIE LOOPS.
Trim seam allowances.
АЛХАМ 5:
Fold the TIE LOOPS in half lengthways matching the raw seam allowances. Insert the TIE LOOPS into the FRONT of the swimsuit, дотоод болон гадаад даавуу хооронд.
Pin and stitch the seam allowances.
АЛХАМ 6:
Pull the swimsuit RIGHT SIDES out through the open sections on the top and bottoms.
дотор нээлтийн давхарга тэтгэмж дахин. жижиг ашиглан баталгаажуулах, whip stitches.
АЛХАМ 7:
There are 3 options for completing the TIES.
сонголт 1: Fold the TIE in half along its length RIGHT SIDES together. Place a length of string in-between. Sew across the top to secure the string to the TIE. Pin and sew the seam allowance. Carefully pull the string turning the TIE RIGHT SIDES out.
сонголт 2: If you have a loop turner:
Fold the TIE in half lengthways and sew the seam allowance. нь давхарга Тернер ашиглан ЗӨВ тал Turn.
сонголт 3: If you have a binder attachment you can use it with zig-zag stitch to create your ties.
Finish the TIE by turning the raw ends under twice and use small stitches to secure or by making a knot at each end. Insert one into each TIE LOOP to complete.