GET THE CLEOPATRA PYJAMA PDF PATTERN HERE
Langkah 1:
Mengambil CUFF HEM yang, fold it in half lengthways and stitch the short seam allowance to form a complete loop.
Repeat this step for the NECKLINE CUFF.
Langkah 2:
Lipat LENGAN CUFF pada separuh sepanjang lebarnya. Padankan tepi mentah CUFF yang dilipat dengan SLEEVE.
Kemudahan (stretch the CUFF enough to reach from side to side) onto the end of the SLEEVE. Pin dan stitch.
Repeat for the BACK LEGS.
Langkah 3:
Match the back of the SLEEVE to the BACK RIGHT SIDES TOGETHER.
Pin dan jahitan di tempat.
Langkah 4:
Match the FRONT to the front side of the SLEEVE. Pin dan menjahit seperti sebelum ini.
Langkah 5:
Dengan pakaian BELAH SALAH keluar, lay the FRONT and BACK RIGHT SIDES together.
pin, stitch, trim and finish from the SLEEVE CUFF to the hem along the side seam.
Clip almost up to the seam allowance at the underarm point to allow the garment to lay flat once turned. If you have finished the seam allowance close to the body this may not be necessary
LANGKAH berulang 2-5 untuk bahagian lain pakaian.
Langkah 6:
Fold the BACK LEGS in half aligning the seam allowances. Pin dan stitch.
Langkah 7:
Match the raw edges of the BACK LEG with the leg opening on the FRONT and BACK pieces. Match the marks. The mark at the BACK LEG central seam line matches to the lower FRONT.
Half of the BACK LEG remains unsewn and becomes part of the hemline.
Pin dan stitch.
Langkah 8:
Skip to Step 11 if you are using the NECK WARMER or Step 14 for the NECKLINE CUFF.
Meletakkan keping HOOD BELAH KANAN bersama-sama. Pin dan jahitan di sekitar garis jahitan luar.
Langkah 9:
Ambil Cuff Hood, Lipatnya dengan separuh memadankan elaun jahitan terpanjang. Pin dan jahitan ke pembukaan tudung.
Langkah 10:
Overlap the two seam allowances of the HOOD CUFF so one is behind then other. Sapukan pusat manset hud ke bahagian tengah pakaian.
Padankan bahagian belakang tudung dengan bahagian belakang pakaian. Pin dan jahitan sekitar.
Langkah 11:
Fold the NECK WARMER CUFF in half along the centre fold line.
Langkah 12:
Sew the raw edges together.
Langkah 13:
Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.
Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. Pin dan stitch.
Langkah 14:
Match the centre back and front of the NECKLINE CUFF with that of the main garment.
Ease the NECKLINE CUFF around the neckline opening on the garment. Pin dan stitch.
Langkah 15:
Find the centre back and front of the HEM CUFF and that of the main garment hem. Mark with pins.
Mengambil CUFF HEM yang. Fold in half and align the raw seam allowances to that of the lower edge of the pyjama, beginning by matching the centre front and back marks. Pin dan mengurangkan ia seperti yang anda pergi sekitar. Menyelesaikan elaun jahitan.