GET THE AMIR TEE PDF PATTERN HERE
PASS 1:
Lay the FRONT RIGHT SIDES together with the BACK along the shoulder seam.
Pin u ħjata f'postha.
Uża stitch żigżag jew stitch medda ieħor matul dan il-proġett. Jiżguraw ukoll li uża labra magna ballpoint Jersey.
PASS 2:
SKIP TO STEP 4 FOR SLEEVE
Open up the garment with the RIGHT SIDES up.
Take the LEG CUFF piece and fold in half lengthways.
Ease the LEG CUFF to the armhole, distributing it evenly around. Pin u stitch.
Finish the seam with an overlocker or zig zag stitch.
Repeat Steps 1 u 2 for the other armhole.
PASS 3:
Bil-libsa Ġnub Ħżiena barra, match the side seam allowances ensuring to align the LEG CUFFS.
Pin and stitch the seam allowances on both sides. Finish the seam as before.
PASS 4:
Itwi l-CUFF tal-Kmiem min-nofs tul il-wisa’ tiegħu.
Ease onto the end of the SLEEVE. Pin u stitch.
PASS 5:
Open up the FRONT and BACK RIGHT SIDES towards you.
Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK. Pin to the underarm points of the side seams and the center of the SLEEVE head to the shoulder point. Ease the rest in.
Stitch and finish the seam allowance using zig zag stitch or an overlocker.
PASS 6:
Bil-libsa Ġnub Ħżiena barra, lay the FRONT and BACK RIGHT SIDES together.
Pin, stitch, trim and finish from the SLEEVE CUFF to the hem along the side seam.
Iklip kważi sal-konċessjoni tal-ħjata fil-punt ta 'taħt id-driegħ biex tippermetti li l-ilbies ikun ċatt ladarba ddawwar. Jekk spiċċajt il-konċessjoni tal-ħjata qrib il-ġisem dan jista' ma jkunx meħtieġ.
PASS 7:
Ħu l-CUFF HEM u NECKLINE CUFF (irreferi għall-Pass 10 if you are using the NECK WARMER CUFF or Step 13 for HOOD) u itwi fin-nofs Ġnub DRITT flimkien biex toħloq linja kontinwa. Pin u ħjata l-konċessjonijiet tal-ħjata qasira.
PASS 8:
Applika l-HEM CUFF mal-keffa tal-ilbies, Ġnub tal-lemin flimkien.
Ħalli madwar indaqs imbagħad pin u stitch fil-post.
Lesti l-allowance tal-ħjata.
PASS 9:
USING THE NECKLINE CUFF – SKIP TO STEP 10 FOR NECK WARMER, PASS 13 FOR HOOD.
Fold the NECKLINE CUFF in half matching the raw edges. Ħaffef il-CUFF GĦONQ madwar il-ftuħ tal-għonq, Ġnub tal-lemin flimkien.
Pin u ħjata f'postha u spiċċa l-konċessjoni tal-ħjata.
PASS 10:
USING THE NECK WARMER
Itwi l-NECK WARMER CUFF min-nofs tul il-linja taċ-ċentru tat-tinja.
PASS 11:
Sew it-truf nejjin flimkien.
PASS 12:
Agħfas tiftaħ il-konċessjonijiet tal-ħjata. Itwi l-NECK WARMER CUFF lura fuqu nnifsu billi taħbi l-konċessjonijiet tal-ħjata li għadhom kemm ġew meħjutin u toħloq linja sħiħa ta’ drapp doppju.
Sib il-postijiet ta 'quddiem taċ-ċentru u ta' wara taċ-ċentru fuq l-għonq tal-għonq u l-għonq prinċipali tal-ilbies. Qabbel it-truf mhux maħduma tal-NECK WARMER mal-għonq tal-ilbies. Pin u stitch.
PASS 13:
Qiegħed flimkien il-biċċiet tal-HOOD IL-ĠNUBA DRITT. Pin u ħjata madwar il-linja tal-ħjata ta 'barra.
PASS 14:
Ħu l-CUFF HOOD, itwiha fin-nofs li tqabbel l-itwal allowances tal-ħjata. Pin u ħjata mal-ftuħ tal-KAPPUN.
PASS 15:
Overlap the two seam allowances of the HOOD CUFF so one is behind the other. Applika ċ-ċentru tal-CUFF HOOD maċ-ċentru ta 'quddiem tal-ilbies.
Qabbel id-dahar taċ-ċentru tal-HOOD mad-dahar taċ-ċentru tal-ilbies. Pin u ħjata madwar.