PASS 1:
Aqta 'l-biċċiet kollha tal-mudell.
With the FRONT and BACK TOP pieces RIGHT SIDES together, pin and stitch the side seam allowances.
PASS 2:
Apply bias binding to the centre back and armhole seam allowances.
pin and stitch binding RIGHT SIDES together.
trim seam allowance to the finished binding width. Clip armhole seam allowance.
Press the seam.
Finish the binding by turning the un-sewn raw edge to the inside and matching the fold to the stitch line. Top stitch in place.
PASS 3:
Fold down the necklines of the FRONT and BACK TOP pieces 5mm then again 20mm toward the WRONG SIDE. Topstitch in place.
PASS 4:
Lay WAISTBAND 1 RIGHT SIDES together with WAISTBAND 2. Sew the seam allowances up to the markers. Fold and press the WAISTBAND in half lengthways, ready to apply.
PASS 5:
Match the centre back of the TOP to the centre back of the WAISTBAND. Repeat for the centre fronts. Finish pinning around the WAISTBAND.
Pin and stitch the seam allowance.
PASS 6:
Itwi l-INBATA bin-nofs tul it-tul tagħha Ġnub DRITT flimkien. Poġġi tul ta’ spag bejn wieħed u ieħor. Ħut tul il-parti ta 'fuq biex tassigura s-sekwenza mal-TIE. Pin u sew il-konċessjoni tal-ħjata. B'attenzjoni iġbed is-sekwenza ddawwar il-Ġnub tal-Lemin tal-INBATA 'l barra.
Jekk għandek loop turner:
Itwi t-TIE bin-nofs fit-tul u sew il-konċessjoni tal-ħjata. Dawwar il-Ġnub LEMINJIN 'il barra billi tuża turner tal-ħjata.
Finish the TIE by pressing it and turning the raw ends under twice and use small stitches to secure. Insert into the WAISTBAND to complete.
Jekk għandek twaħħil tal-legaturi tista 'tużah b'punt taż-żig-zag biex toħloq ir-rabtiet tiegħek.
PASS 7:
FOR THE JUMPSUIT OR DRESS
Follow the tutorial to make the SKIRT or TROUSERS.
Match the centre front, back and side seams of the TOP and SKIRT or TROUSER RIGHT SIDES together.
Pin u stitch. Lesti l-allowance tal-ħjata.