STEP 1:
Suitable for fleece/jersey/towelling fabric
Turn the SLEEVE cuff back 1.5cm to the RIGHT SIDE, then fold it again back on itself 3cm.
Top stitch close to the edge on the RIGHT SIDE.
STEP 2:
Match the back SLEEVE armhole with the BACK, Txoj cai tog together.
Tus PIN thiab koj plooj. Finish with either an overlocker or zig-zag stitch. Trim the seam allowance.
STEP 3:
Match the FRONT armhole with the front SLEEVE, Txoj cai tog together.
Tus PIN, stitch and finish as before.
Repeat Steps 1-2 for the other armhole.
STEP 4:
Lay the FRONT RIGHT SIDES together with the BACK, matching the side seam and SLEEVE seam allowances.
Tus PIN, plooj thiab suaj kaum.
Clip almost up to the seam allowance at the underarm point to allow the garment to lay flat once turned. Yog tias koj tau ua tiav cov leeg tso cai ze rau lub cev qhov no yuav tsis tsim nyog
STEP 5:
Ua tiav cov ris tsho hemline siv koj txoj kev ua tiav uas koj nyiam.
Tig lub hemline mus rau TSIS NCAJ NCEES LAWM 1.5cm.
Topstitch kom ruaj ntseg.
STEP 6:
Quav qhov ntev ntawm DAB TSHOS hauv ib nrab TXOJ CAI SAB ua ke.
Pin thiab xaws ob qhov kawg luv luv. Clip cov ces kaum thiab txiav mus rau 5mm.
Tig RIGHT SIDES tawm.
STEP 7:
Phim cov npoo nyoos ntawm DAB TSHOS nyob ib ncig ntawm lub tsho qhib.
Tus PIN, plooj thiab suaj kaum.
Sab saum toj xaws ze rau txoj leeg los ntawm RIGHT SIDE kom ruaj ntseg rau txoj leeg tiaj tiaj.
STEP 8:
Nteg ob daim WAISTBAND RIGHT SIDES ua ke.
Pin thiab xaws txhua qhov chaw tawm ntawm kwv yees li 10cm kom tig sab xis tawm.
Tig RIGHT SIDES tawm thiab nias cov nqaws tiaj tus. Sab saum toj xaws nyob ib ncig ntawm cov npoo kom tuav tiaj tus thiab kaw qhov qhib 10cm.
Apply a piece of velcro to either side of the WAISTBAND at the ends, approximately 5cm long.
STEP 9:
Align the WAISTBAND with the underarm points.
Top stitch through the WAISTBAND and BACK to secure in place.