STEP 1:
Please read the printing instructions!
Create the welt pockets on the FRONT pieces. Follow the welt pocket tutorial included or find it here: https://www.the-tailoress.com/product/welt-pockets-pdf-sewing-pattern/
STEP 2:
Nrog rau TIES TSIS NCAJ NCEES LAWM SAB up, Quav rov qab 1cm ntawm ib qho kawg. Quav rov qab 5mm raws ob sab ntev thiab nias. Tom qab ntawd quav lub TIE hauv ib nrab zais cov npoo nyoos yav dhau los tig rau hauv. Stitching nyob rau qhov chaw.
Ib qho kawg yuav nyob twj ywm ib qho nyoos ntug, Qhov no yuav xaws rau hauv lub tsho sab seam.
STEP 3:
Quav lub DAB TSHOS TXOJ CAI SAB ua ke lengthways. Xaws cov leeg hauv qab ua ke. Clip lub ces kaum thiab txiav cov leeg pab. Tig SAB tawm thiab nias.
STEP 4:
Nteg PEM NTEJ thiab ROV QAB SAB XIS ua ke. Pin thiab xaws lub xub pwg leeg nkaws.
Hais dua rau sab tod.
STEP 5:
Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK pieces. Matching the underarm points.
Pin and stitch the seam allowance between the underarm points.
Press the seam open. Repeat for the other SLEEVE.
STEP 6:
Nrog txoj siv ceeb lawm sab tawm, match the SLEEVE seam allowances and the side seams of the FRONT and BACK.
Insert the TIE at the tie insertion point of the side seam on one side. Insert it between the FRONT and BACK so that it is visible on the RIGHT SIDE of the garment once sewn.
Pin and stitch the SLEEVE from the underarm point at the sleeve opening, around the curve to the lowest inside point of the SLEEVE. Finish the seam allowances by clipping the curved edge and trimming to 7mm.
Pin and stitch the side seam from the underarm point to the hemline. Turn RIGHT SIDES out and press the seams allowances.
STEP 7:
With the RIGHT SIDES out, pin the COLLAR around the centre front and neckline of the FRONT and BACK.
Pin the remaining TIE at the tie insertion point on the opposite side to where the side seam TIE is placed, on the centre FRONT.
Stitch just within the seam allowance.
STEP 8:
Follow Steps 4-6 to create the lining, ignoring references to the TIES and there’s no need to clip the SLEEVE seam allowance.
STEP 9:
Arrange the lining RIGHT SIDES together with the main garment. Pin and stitch around the centre front opening, including the COLLAR.
Stitching nyob rau qhov chaw.
Tig SAB tawm thiab nias.
STEP 10:
Turn back the seam allowances of the SLEEVE at both openings. Secure with small hand stitches. Press.
Turn up the main garment hemline 1 inch / 2.5cms and press. Turn up the lining hemline the same amount and pin. Sew together using hem stitch.