STEP 1:
Tsim cov hnab tshos welt ntawm ob qho tib si hauv ob sab phlu lossis lub ntsiab ntaub Pem hauv ntej qauv pieces.
Ua raws li cov welt pockets tutorial suav nrog.
STEP 2:
Nrog rau TIES TSIS NCAJ NCEES LAWM SAB up, Quav rov qab 1cm ntawm ib qho kawg. Quav rov qab 5mm raws ob sab ntev thiab nias. Tom qab ntawd quav lub TIE hauv ib nrab zais cov npoo nyoos yav dhau los tig rau hauv. Xaws ze rau ntawm ntug seam.
Ib qho kawg yuav nyob twj ywm ib qho nyoos ntug, Qhov no yuav xaws rau hauv lub tsho sab seam.
STEP 3:
Xaws sab saum toj nruab nrab rov qab leeg tso ua ke. Nias cov nqaws qhib.
Quav lub DAB TSHOS TXOJ CAI SAB ua ke lengthways. Xaws cov leeg hauv qab ua ke. Clip lub ces kaum thiab txiav cov leeg pab. Tig SAB tawm thiab nias.
STEP 4:
Nteg PEM NTEJ thiab ROV QAB SAB XIS ua ke. Pin thiab xaws lub xub pwg leeg nkaws.
Hais dua rau sab tod.
STEP 5:
Lay the SLEEVE along the FRONT and BACK matching the UNDERARM points.
Tus PIN thiab koj plooj. Press the seam open. Hais dua rau sab tod.
Lay the SLEEVE along the FRONT and BACK matching the UNDERARM points.
Tus PIN thiab koj plooj. Press the seam open. Hais dua rau sab tod.
STEP 6:
Decide which FRONT side you would like to overlap on the kimono. The side seam TIE will be inserted into the opposite side seam.
Nteg PEM NTEJ thiab ROV QAB SAB XIS ua ke. Fold the SLEEVE RIGHT SIDES together as shown. Snip the FRONT side seam allowance at the underarm point to allow the SLEEVE seam allowance to lay open while the side seam lays together.
Insert one of the TIES into the side seam allowance at the TIE INSERT POINT.
Pin and stitch from the SLEEVE SEAM POINT to the hem of the FRONT and BACK.
Clip the seam allowance almost to the seam line at the underarm point to allow it to lay flat once turned. Press the seams.
STEP 7:
Pin the remaining TIE to the TIE INSERT POINT on the FRONT opposite the other TIE already inserted.
Pin the COLLAR matching the seams on the back neckline and around to the COLLAR END POINTS on the FRONT.
Sew a couple of mm within the seam allowance.
STEP 8:
Repeat Steps 4,5 and 6 for the lining, ignoring the use of the TIES.
Lay the main garment and lining RIGHT SIDES TOGETHER.
Pin and stitch around the collar and centre front.
STEP 9:
Turn the main garment hemline and sleeve facings to the WRONG SIDE and press. Catch stitch by hand to secure.
With the garment RIGHT SIDES out, fold the sleeve and hemline seam allowances of the lining to the inside and secure with catch stitch to the seam allowance of the facings.
Repeat for the open SLEEVE seam allowances.