STEG 1:
Kutt ut alle mønsteret stykker.
Brett Mansjett i armene i to langs dens bredde. Match de rå kantene på den brettede MANsjetten til ERMELET.
Letthet (stretch the CUFF enough to reach from side to side) onto the end of the SLEEVE. Pin og sting.
STEG 2:
Ta HEM cuff og HALSKANT Cuff (refer to Step 5 if you are using the NECK WARMER CUFF) and fold in half RIGHT SIDES together to create a continuous loop. Pin og sy den korte sømmonnene.
STEG 3:
Match the back of the SLEEVE to the BACK RIGHT SIDES TOGETHER.
Pin og sting på plass.
STEG 4:
Match the FRONT to the front side of the SLEEVE. Pin og sy som før.
Gjenta trinn 3-4 til den andre siden av plagget.
STEG 5:
Legg foran og bak høyre sammen, pin from the side seam from the SLEEVE CUFF down to the garment hem.
Sy og avslutt sømmonnet.
Clip almost up to the seam allowance at the underarm point to allow the garment to lay flat once turned. If you have finished the seam allowance close to the body this may not be necessary
STEG 6:
Påfør HEM mansjetten til plagget hem, Høyre sammen. Match the centre front and back points.
Lette rundt jevnt deretter pin og sy på plass.
Avslutt sømmonnet.
STEG 7:
Skip to Step 10 if you are using the NECK WARMER or Step 13 for HALSKANT Cuff.
Lå panseret stykker høyre sammen. Pin and stitch around the outside seam line.
STEG 8:
Take the HOOD CUFF, fold it in half matching the longest seam allowances. Pin and stitch to the HOOD opening.
STEG 9:
Overlap the two seam allowances of the HOOD CUFF so one is behind then other. Apply the centre of the HOOD CUFF to the centre front of the garment.
Match the centre back of the HOOD with the centre back of the garment. Pin and stitch around.
STEG 10:
Fold the NECK WARMER CUFF in half along the centre fold line.
STEG 11:
Sew the raw edges together.
STEG 12:
Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.
Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. Pin og sting.
STEG 13:
WITH NECKLINE CUFF
Fold the NECKLINE CUFF in half, samsvarer med de rå kanter. Ease the NECKLINE CUFF around the neckline opening, Høyre sammen.
Pin and stitch in place and finish the seam allowance.