Joey Tee Tutorial
[PrintFriendly]
As imagens estão disponíveis no download padrão.
[wc_accordion collapse=”0″ leaveopen=”0″ turma=”” layout=”box”]
[wc_accordion_section title=”Step 1″]
Cut out all pieces marking any balance or ease marks. This garment will have reasonable stretch to it so it is recommended to use zig-zag stitch wherever a seam is constructed.
Lay the front edge of the SLEEVE armhole to the FRONT armhole, Lados direito juntos.
Pin e costurar a costura.
Repeat for the other FRONT side.
[/wc_accordion_section]
[wc_accordion_section title=”Step 2″]
Lay the back SLEEVE armhole to the BACK armhole RIGHT SIDES together.
Pin e costurar a costura.
Repeat for the other BACK side.
Finish all sleeve seam allowances using an overlocker or zig-zag stitch. Apare se necessário.
[/wc_accordion_section]
[wc_accordion_section title=”Step 3″]
Com a roupa lados errados fora, align the side seams and SLEEVE seams.
Pin and stitch continuously from SLEEVE cuff to the garment hem.
Finish the seam allowances as before.
[/wc_accordion_section]
[wc_accordion_section title=”Step 4″]
SEM HOOD:
Dobre ao meio do pescoço PUNHO DIREITO lados juntos e costurar a curto costura.
Dobre o PESCOÇO PUNHO ao meio para que as bordas cruas atender.
Facilidade ao redor do decote vestuário. Pin e ponto no lugar.
For HOOD see Steps 5-7.
[/wc_accordion_section]
[wc_accordion_section title=”Step 5″]
COM CAPA:
Coloque duas peças CAPA DIREITO lados juntos. Pin e costurar o zagueiro costura. Apare e terminar a costura com ponto zig-zag ou um ponto overlocking.
[/wc_accordion_section]
[wc_accordion_section title=”Step 6″]
Complete the hood by folding the front opening seam allowance back 0.75mm then again 0.75mm. Pin e ponto no lugar para terminar a costura.
[/wc_accordion_section]
[wc_accordion_section title=”Step 7″]
Ease the neckline of the HOOD on to the garment neckline. Overlap the centre front edges of the HOOD by 1.5cm onto each other.
Pin e Stitch. Termine a costura.
You may like to top-stitch the seam allowance flat towards the bottom of the garment.
[/wc_accordion_section]
[wc_accordion_section title=”Step 8″]
Completar a bainha de vestuário e punhos ao terminar a costura, em seguida, dobrando-o para trás e 1,5 centímetros topo-costura para fixar.
Pressione todas as costuras.
[/wc_accordion_section]
[/wc_accordion]