PAS 1:
1.5alocația cm cusătură inclusă
Se taie toate piesele de model. The CUFFS will sew better if made from jersey.
Fold the LEG CUFFS in half lengthways. Match the raw edges of one with those of FRONT 1, Din dreapta împreună.
Pin si cusatura în loc. Se repetă pentru FRONT 2.
Utilizați cusatura zig-zag sau alte cusatura elastica pe tot parcursul acestui proiect. De asemenea, se asigura de a utiliza un ac mașină Jersey pix.
PAS 2:
cu FRONT 1 over FRONT 2 with both parts RIGHT SIDES up, align either end of the cuffs on FRONT 1 with the markers on FRONT 2.
Pin în loc.
PAS 3:
FAȚĂ Lay 1 & 2 RIGHT SIDES together with the BACK. Pin the side seam allowances together, removing the pins at the join of FRONT 1 & 2 and replacing to secure through all pieces.
Stitch in place. Repeat for the opposite side.
PAS 4:
Take the HEM CUFF and NECKLINE CUFF (if using) and fold in half RIGHT SIDES together to create a continuous loop. Pin si cusatura cusăturii scurte.
Skip to step 10 for neck warmer or step 13 for hood.
PAS 5:
Fold the NECKLINE CUFF in half matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, Din dreapta împreună.
Pin and stitch in place and finish the seam allowance.
PAS 6:
Aplicați manșeta HEM la tivul de îmbrăcăminte, Din dreapta împreună.
Ușurința în jurul uniform apoi fixați și coase în loc.
Termina alocația cusătură.
PAS 7:
USING THE NECK WARMER
Fold the NECK WARMER CUFF in half along the centre fold line.
PAS 8:
Sew the raw edges together.
PAS 9:
Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.
Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. PIN-ul si cusatura.
PAS 10:
Așezați bucățile HOOD din dreapta împreună. Pin and stitch around the outside seam line.
PAS 11:
Take the HOOD CUFF, fold it in half matching the longest seam allowances. Pin and stitch to the HOOD opening.
PAS 12:
Overlap the two seam allowances of the HOOD CUFF so one is behind the other. Apply the centre of the HOOD CUFF to the centre front of the garment.
Match the centre back of the HOOD with the centre back of the garment. Pin and stitch around.