GET THE AMIR TEE PDF PATTERN HERE
STEP 1:
جي ڪلهي سيون گڏ ئي موٽي سان گڏجي جي سامهون حق جهڙيون رکون.
پن ۽ جاء ۾ سل.
هن پروجيڪٽ جي اهڙي اسٽيشينن zag م سل يا ٻين تني م سل استعمال ڪريو. به بال پوائنٽ جرسي مشين سوئي استعمال ڪرڻ کي يقيني.
STEP 2:
SKIP TO STEP 4 FOR SLEEVE
مٿي جي حق ڪنارن سان جي ڪپڙن کلي.
پيئي CUFF ٽڪرو وٺي ۽ اڌ lengthways ۾ ٻٽو.
جي armhole ڪرڻ جي پيئي CUFF آسانيء, ان وڃي، چوڌاري ورڇ. پن ۽ م سل.
هڪ overlocker سان سيون کي ختم يا zag م سل اسٽيشينن.
ورجائي فائرفاڪس 1 ۽ 2 ٻئي armhole لاء.
STEP 3:
جي ڪپڙن تي ظلم جهڙيون ٻاهر سان, جي پاسي سيون پيئي CUFFS ميمن ۽ يقيني ڀتو وٺڻ سان ڀيٽ.
پن ۽ سل ٻنهي پاسن تي سيون ڀتو. اڳ جيئن ته سيون ختم.
STEP 4:
Fold the SLEEVE CUFF in half along its width.
Ease onto the end of the SLEEVE. پن ۽ م سل.
STEP 5:
Open up the FRONT and BACK RIGHT SIDES towards you.
Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK. Pin to the underarm points of the side seams and the center of the SLEEVE head to the shoulder point. Ease the rest in.
Stitch and finish the seam allowance using zig zag stitch or an overlocker.
STEP 6:
جي ڪپڙن تي ظلم جهڙيون ٻاهر سان, lay the FRONT and BACK RIGHT SIDES together.
پن, stitch, trim and finish from the SLEEVE CUFF to the hem along the side seam.
Clip almost up to the seam allowance at the underarm point to allow the garment to lay flat once turned. If you have finished the seam allowance close to the body this may not be necessary.
STEP 7:
Take the HEM CUFF and NECKLINE CUFF (refer to Step 10 if you are using the NECK WARMER CUFF or Step 13 for HOOD) and fold in half RIGHT SIDES together to create a continuous loop. پن ۽ سل مختصر سيون ڀتو.
STEP 8:
جي ڪپڙن hem ڪرڻ جي HEM CUFF لاڳو, گڏجي حق جهڙيون.
ھائو! چوڌاري آسانيء پوء پن ۽ جاء ۾ سل.
جي سيون الائونس ختم.
STEP 9:
USING THE NECKLINE CUFF – SKIP TO STEP 10 FOR NECK WARMER, STEP 13 FOR HOOD.
Fold the NECKLINE CUFF in half matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, گڏجي حق جهڙيون.
Pin and stitch in place and finish the seam allowance.
STEP 10:
USING THE NECK WARMER
Fold the NECK WARMER CUFF in half along the centre fold line.
STEP 11:
Sew the raw edges together.
STEP 12:
Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.
Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. پن ۽ م سل.
STEP 13:
اتان جو ھود ٽڪر حق جهڙيون رکون. Pin and stitch around the outside seam line.
STEP 14:
Take the HOOD CUFF, fold it in half matching the longest seam allowances. Pin and stitch to the HOOD opening.
STEP 15:
Overlap the two seam allowances of the HOOD CUFF so one is behind the other. Apply the centre of the HOOD CUFF to the centre front of the garment.
Match the centre back of the HOOD with the centre back of the garment. Pin and stitch around.