بين بيگ چيئر ٽيچر

 

STEP 1:

سڀ ٽڪرا ڪٽيو. مٿي پٺين ٽڪرا ۾ ڊارون کي ٽڙڻ سان لڳايو. پن ۽ م سل.

 

STEP 2:

Pin the Top Back onto the top of the Top Seat piece and stitch. Start pinning at the centre then the edges, آرام کي جاءِ تي آرام ڪريو.

 

STEP 3:

Pin and stitch the Center Front and Centre Top of the Side Panel pieces right sides together.

 

STEP 4:

Take the Top Seat and Top Back pieces that were previously joined and carefully pin them in place onto the Side Panel matching the centre point first then pinning around. سلائي.

 

STEP 5:

واپس سائڊ پينل کي پن ۽ سنواريو. Begin pinning from the Centre Top easing the rest around.

 

STEP 6:

Pin the Bottom piece to the Side Panel and Back pieces. جڳھ کي زپ لاءِ نشان لڳايو. زپ پوائنٽ جي آخر ۾ رنگڻ شروع ڪيو ھڪڙي اسٽڪ اسٽنگ سان محفوظ ڪرڻ. When you reach the start of the zip point secure with backstitch then change stitch size to large and sew the zip seam.

 

STEP 7:

Fold the ZIP ENDS in half and place across the zip end placements.

زپ ٽيپ کي سائڊ پينل ۽ هيٺيون ٽڪرن جي نشان لڳل واري حصي جي وچ ۾ سيپ جي اجازتن کي پن ۽ اسٽيو ڪري ڇڏيو. زپ کي ويجهو ڪرڻ لاءِ زپ فوٽ ڪتب آڻيو. عارضي سلائي تائين رسائي ڪرڻ جي قابل ٿيڻ لاءِ زپ کي ٿورو ڇڏڻ ڇڏي ڏيو.

 

STEP 8:

احتياط سان عارضي سلائي کڻي اچو ۽ زپ کي کوليو. bagانچي جي صحيح طرف ٻاهر ۽ ڪپڙا جي سا andي پاسي جي زپ جي مٿان مٿين سلائي.

 

STEP 9:

Fold the remaining ZIP ENDS in half.

With the bag WRONG SIDES out, place the ZIP ENDS over the first ones already sewn in.

Pin and stitch through each ZIP END and the zip tape. Trim the excess from the sides.

 

STEP 10:

داني کي دٻائڻ لاءِ اندروني بیگ ٺاهڻ لاءِ پوئين سڀني قدمن کي ورجائي وٺو. وڏي زپ لاءِ نشان ڏيڻ بدران, mark for a small 20cm zip along the marked zip line where the side panel and bottom pieces join.

پوء اڳتي وڌو ۽ پنھنجو بين ڀريو!

The outer cover is designed to be removed so you can wash it when needed, while the lining bag retains all the beans.

Filling the bags can be very tricky and messy. It may be easier to do if you use an old plastic bottle with the ends cut off as a funnel. Insert into the zip opening and close the zip up to it to hold in place. Then gently tip or scoop the beans in.