Joey Tee Tutorial
[printfriendly]
Snímky sú k dispozícii vo vzore stiahnutie.
[wc_accordion collapse=”0″ leaveopen=”0″ trieda=”” layout=”box”]
[wc_accordion_section title=”Step 1″]
Návod na svetrové šaty s kapucňou. Návod na svetrové šaty s kapucňou.
Lay the front edge of the SLEEVE armhole to the FRONT armhole, Pravá strana spolu.
Pin a steh prídavok na šev.
Repeat for the other FRONT side.
[/wc_accordion_section]
[wc_accordion_section title=”Step 2″]
Lay the back SLEEVE armhole to the BACK armhole RIGHT SIDES together.
Pin a steh prídavok na šev.
Repeat for the other BACK side.
Finish all sleeve seam allowances using an overlocker or zig-zag stitch. Výbava V prípade potreby.
[/wc_accordion_section]
[wc_accordion_section title=”Step 3″]
S odevné rubom von, align the side seams and SLEEVE seams.
Pin and stitch continuously from SLEEVE cuff to the garment hem.
Finish the seam allowances as before.
[/wc_accordion_section]
[wc_accordion_section title=”Step 4″]
bez kapucne:
Zložiť v polovici krku manžeta pravej strany spoločne a šiť príspevok krátky šev.
Zložiť krku manžetu na polovicu tak, aby sa hrubé okraje spĺňajú.
Zmierniť okolo odevu výstrihu. Pin a steh na mieste.
For HOOD see Steps 5-7.
[/wc_accordion_section]
[wc_accordion_section title=”Step 5″]
WITH HOOD:
Ležali dve Hood kúsky pravej strany spoločne. Pin and stitch the center back seam allowance. Trim and finish the seam allowance with zig-zag stitch or an overlocking stitch.
[/wc_accordion_section]
[wc_accordion_section title=”Step 6″]
Complete the hood by folding the front opening seam allowance back 0.75mm then again 0.75mm. Pin and stitch in place to finish the seam.
[/wc_accordion_section]
[wc_accordion_section title=”Step 7″]
Ease the neckline of the HOOD on to the garment neckline. Overlap the centre front edges of the HOOD by 1.5cm onto each other.
Pin a steh. Dokončiť prídavok na šev.
You may like to top-stitch the seam allowance flat towards the bottom of the garment.
[/wc_accordion_section]
[wc_accordion_section title=”Step 8″]
Dokončiť odevu lem a manžety dokončením príspevok na šev, potom ho skladacie späť 1.5cm a prešitie pre zaistenie.
Stlačte všetky švy.
[/wc_accordion_section]
[/wc_accordion]