Valentine Style 1 konzultácie

 

KROK 1:

Match two TOP pieces RIGHT SIDES together lining up the pleats.

Fold the pleats through both layers together and pin in place.

Pin and stitch the shoulder seam allowance. lis.

Repeat for the remaining two TOP pieces.

 

KROK 2:

Open up the TOP pieces RIGHT SIDE up.

Apply bias binding to the centre back and armhole seam allowances.
pin and stitch binding RIGHT SIDES together.
trim seam allowance to the finished binding width. Clip armhole seam allowance.
Press the seam.
Finish the binding by turning the un-sewn raw edge to the inside and matching the fold to the stitch line. Top stitch in place.

 

KROK 3:

With the two TOP pieces RIGHT SIDES together, pin, stitch and finish the side seam allowance.

Repeat for the other two TOP pieces.

 

KROK 4:

Položte PÁS 1 PRAVÉ STRANY spolu s PÁSOM 2. Švové prídavky prišijeme až po fixky. Zložte a stlačte PÁS na polovicu pozdĺžne, pripravený na použitie.

 

KROK 5:

Follow the tutorial for the skirt or trousers if you are wanting to make the dress or jumpsuit.

Match the waistlines of the TOP pieces together. Alternate how you overlap them, so if the lefthand front piece is in front of the righthand front piece, the lefthand back piece is behind the righthand back piece.

TOP
Match the centre front and back of the TOP to the WAISTBAND. Pin a steh na mieste. Finish the seam allowance and press.

DRESS/JUMPSUIT
Arrange the TOP sections RIGHT SIDES together with the TROUSERS and WAISTBAND. Match side seams and centre front and back points.

Pin a steh na mieste. Finish the seam allowance and press.

 

KROK 6:

Kravatu prehnite na polovicu po jej dĺžke PRAVÝMI STRANAMI k sebe. Medzi nimi umiestnite dĺžku šnúrky. Zošite cez vrch, aby ste zaistili šnúrku ku KRVAZACI. Švový prídavok prišpendlíme a prišijeme. Opatrne potiahnite šnúrku otočením KRÚVAČKY NA PRAVÉ STRANY von.

Ak máte obracač slučiek:
Kravatu prehnite pozdĺžne na polovicu a prišite švový prídavok. Otočte ľavú stranu pomocou švu obracač.

Dokončite kravatu tak, že ju stlačíte a surové konce dvakrát otočíte a pomocou malých stehov zaistíte. Dokončite vložením do PÁSU.

Ak máte viazací nástavec, môžete ho použiť s cik-cak stehom na vytvorenie vašich kravát.