Vadnica za pulover Penny

KORAK 1:

Izrežite vse kosov vzorec.
Zložljiva tulec manšeto na pol vzdolž njegove širine. Match the raw edges of the folded CUFF to the SLEEVE.

Ease (stretch the CUFF enough to reach from side to side) onto the end of the SLEEVE. Pin in šiv.

KORAK 2:

Vzemite MANŠETO NA ROBU in MANŠETO VRATNEGA IZREZA (refer to Step 5 if you are using the NECK WARMER CUFF) in prepognite DESNE STRANI skupaj, da ustvarite neprekinjeno zanko. Pin in šiv kratke dodatke šiv.

KORAK 3:

Match the back of the SLEEVE to the BACK RIGHT SIDES TOGETHER.

Pin in šiv v mestu.

KORAK 4:

Match the FRONT to the front side of the SLEEVE. Pin in šiv kot prej.

Ponovite KORAK 3-4 za drugo stran oblačila.

KORAK 5:

Položite sprednji in zadnji desni strani skupaj, pin from the side seam from the SLEEVE CUFF down to the garment hem.

Stitch in konča dodatek za šiv.

Clip almost up to the seam allowance at the underarm point to allow the garment to lay flat once turned. If you have finished the seam allowance close to the body this may not be necessary

KORAK 6:

Uporabi rob manšeta za oblačilno rob, Desni strani skupaj. Match the centre front and back points.

Enostavnost približno enakomerno potem pin in šiva v mestu.

Dokončajte dodatek za šiv.

KORAK 7:

Skip to Step 10 if you are using the NECK WARMER or Step 13 za izrez manšeta.

Položite napa kosov desni strani skupaj. Pin in šiv okoli zunanje linije šiva.

KORAK 8:

Vzemi MANŠETO KAPUCE, prepognite ga na pol tako, da se ujema z najdaljšimi dodatki za šive. Pin in šiv na odprtino HOOD.

KORAK 9:

Overlap the two seam allowances of the HOOD CUFF so one is behind then other. Sredino MANŠETE ZA KAPUCO namestite na sredino sprednjega dela oblačila.

Uskladite srednji zadnji del KAPUCE s srednjim zadnjim delom oblačila. Pin in šiv okoli.

KORAK 10:

GRELO ZA VRAT prepognite na polovico vzdolž sredinske črte pregiba.

KORAK 11:

Neobdelane robove zašijte skupaj.

KORAK 12:

Pritisnite in odprite dodatke za šive. MANŠETO ZA GRELO ZA VRAT Zložite nazaj nase, tako da skrijete pravkar prišite dodatke za šive in ustvarite popolno zanko iz podvojenega blaga.

Poiščite sredinski sprednji in zadnji del na vratnem izrezu NECKWARMER in glavnem oblačilu. Neobdelane robove NECK WARMER uskladite z vratnim izrezom oblačila. Pin in šiv.

KORAK 13:

WITH NECKLINE CUFF
Fold the NECKLINE CUFF in half, ujemanje neobdelane robove. MANŠETO ZA VRATNI IZREZ Sprostite okoli odprtine vratnega izreza, Desni strani skupaj.

Pripnite in zašijte na mestu ter dokončajte dodatek za šiv.