Tallaabo qaadid 1:
Labada dhinacba isku xidhnaa laba qaybood.
Pin oo ku dhejiso kaalmada xamuulka ee ka tagida godka qoorta oo furan.
Clip oo goo googooyaa kaalmada xamuulka.
U leexo dhinaca midig oo riix. Top top shot dhagxaan hareeraha geeska.
Tallaabo qaadid 2:
Lay the two BACK pieces RIGHT SIDES TOGETHER. Place the COLLAR between the two BACK pieces at the neckline.
Ku dhaji meesha. Stitch all around as shown in the diagram leaving a 10cm gap unstitched on one side.
Clip and trim the seam allowance as in Step 1 but leave the 10cm seam allowance un-clipped or trimmed.
Turn RIGHT SIDES OUT and press gently using a pressing cloth is necessary. Fold the 10cm opening seam allowance to the inside.
Top-stitch all around the garment.
Tallaabo qaadid 3:
Lay the WAISTBAND pieces RIGHT SIDES TOGETHER.
Pin and stitch leaving a 10cm gap open on one side.
Clip and trim as in Step 2.
Tallaabo qaadid 4:
Turn WAISTBAND RIGHT SIDES OUT. Fold the 10cm opening seam allowance to the inside. Press gently and top stitch.
Tallaabo qaadid 5:
Align the waistband center along the line indicated on the BACK pattern piece.
Apply a single row of stitches approximately 10cm long to the WAISTBAND to secure to the BACK of the garment.
Tallaabo qaadid 6:
Complete by adding the velcro to the neck bands and the waistband ends. Sew the softer part of the velcro to the lining pieces to help avoid the coarser part getting tangled in your pets fur.
Ku tolo dhammaan agagaarka gogosha Velcro si loo hubiyo inay aamin yihiin.
Finally, add your buttons to the waistband to complete your smart Jasper Jacket!