Tallaabo qaadid 1:
Iska yaree dhammaan qaybaha qaabka.
With the FRONT and BACK TOP pieces RIGHT SIDES together, pin and stitch the side seam allowances.
Tallaabo qaadid 2:
Apply bias binding to the centre back and armhole seam allowances.
pin and stitch binding RIGHT SIDES together.
trim seam allowance to the finished binding width. Clip armhole seam allowance.
Press the seam.
Finish the binding by turning the un-sewn raw edge to the inside and matching the fold to the stitch line. Top stitch in place.
Tallaabo qaadid 3:
Fold down the necklines of the FRONT and BACK TOP pieces 5mm then again 20mm toward the WRONG SIDE. Topstitch in place.
Tallaabo qaadid 4:
Lay WAISTBAND 1 RIGHT SIDES together with WAISTBAND 2. Sew the seam allowances up to the markers. Fold and press the WAISTBAND in half lengthways, ready to apply.
Tallaabo qaadid 5:
Match the centre back of the TOP to the centre back of the WAISTBAND. Repeat for the centre fronts. Finish pinning around the WAISTBAND.
Pin and stitch the seam allowance.
Tallaabo qaadid 6:
Isku laab xidhka kala badh oo dhererkiisu yahay dhincyada MIDIG ee wada jir ah. Dhig dherer xadhig ah inta u dhaxaysa. Tol xagga sare si aad u sugo xadhigga TIE. Ku dheji oo tol gunnada tollaynta. Si taxadar leh u soo jiid xadhigga adigoo soo rogaya XADHIGGA MIDIGAHA.
Haddii aad leedahay loop turner:
Isku laab TIE dhererka kala bar oo tolo gunnada tolleynta. U leexi dhinacyada midigta adoo isticmaalaya toleeyaha.
Finish the TIE by pressing it and turning the raw ends under twice and use small stitches to secure. Insert into the WAISTBAND to complete.
Haddii aad leedahay lifaaqa binder waxaad ku isticmaali kartaa tolmada zigzag si aad u abuurto xiriirkaaga.
Tallaabo qaadid 7:
FOR THE JUMPSUIT OR DRESS
Follow the tutorial to make the SKIRT or TROUSERS.
Match the centre front, back and side seams of the TOP and SKIRT or TROUSER RIGHT SIDES together.
Pin iyo stitch. Dhammeystir gunnada guriga.