Mohato 1:
Create the welt pockets on either the lining or main fabric Front pattern pieces.
Follow the welt pockets tutorial included.
Mohato 2:
Ka maqhama a fosahetseng holimo, mena morao ka 1cm ka lehlakoreng le leng. Mena morao ka 5mm ka mahlakoreng a mabeli a malelele ebe o tobetsa. Ebe u mena TIE ka halofo u pata likarolo tse tala tse kentsoeng pele. Stitch close to the seam edge.
Phello e le 'ngoe e tla lula e le bohale, sena se tla rokelloa mofeng oa lehlakoreng la seaparo.
Mohato 3:
Sew the top centre back seam allowances together. Press the seams open.
Mena COLLAR RIGHT SIDE hammoho ka bolelele. Roka litsiane tse tlase tsa seam hammoho. Koala sekhutlo 'me u fokotse meputso ea seam. Retelehela mahlakoreng NEPAHETSENG tsoa ebe o tobetsa.
Mohato 4:
Beha MAHLAKORE A KA PELE LE KA MORAO 'moho. Pina 'me u rokelle meputso ea seam mahetleng.
Pheta ka lehlakoreng le leng.
Mohato 5:
Lay the SLEEVE along the FRONT and BACK matching the UNDERARM points.
Pin le stitch. Tobetsa seam e bulehileng. Pheta ka lehlakoreng le leng.
Lay the SLEEVE along the FRONT and BACK matching the UNDERARM points.
Pin le stitch. Tobetsa seam e bulehileng. Pheta ka lehlakoreng le leng.
Mohato 6:
Decide which FRONT side you would like to overlap on the kimono. The side seam TIE will be inserted into the opposite side seam.
Beha MAHLAKORE A KA PELE LE KA MORAO 'moho. Fold the SLEEVE RIGHT SIDES together as shown. Snip the FRONT side seam allowance at the underarm point to allow the SLEEVE seam allowance to lay open while the side seam lays together.
Insert one of the TIES into the side seam allowance at the TIE INSERT POINT.
Pin and stitch from the SLEEVE SEAM POINT to the hem of the FRONT and BACK.
Clip the seam allowance almost to the seam line at the underarm point to allow it to lay flat once turned. Press the seams.
Mohato 7:
Pin the remaining TIE to the TIE INSERT POINT on the FRONT opposite the other TIE already inserted.
Pin the COLLAR matching the seams on the back neckline and around to the COLLAR END POINTS on the FRONT.
Sew a couple of mm within the seam allowance.
Mohato 8:
Pheta Mehato 4,5 le 6 for the lining, ignoring the use of the TIES.
Lay the main garment and lining RIGHT SIDES TOGETHER.
Pin and stitch around the collar and centre front.
Mohato 9:
Turn the main garment hemline and sleeve facings to the WRONG SIDE and press. Catch stitch by hand to secure.
With the garment RIGHT SIDES out, fold the sleeve and hemline seam allowances of the lining to the inside and secure with catch stitch to the seam allowance of the facings.
Repeat for the open SLEEVE seam allowances.