GET THE AMIR TEE PDF PATTERN HERE
LENGKAH 1:
Iklas SISI KANAN HARAPAN babarengan jeung BAKUNG sapanjang kelim taktak.
Pin na stitch di tempat.
Paké stitch zig-zag atanapi stitch manteng lianna di sakuliah proyék ieu. Ogé mastikeun pikeun ngagunakeun mesin Pulpén jersey jarum.
LENGKAH 2:
SKIP TO STEP 4 FOR SLEEVE
Buka pakéan kalayan SISI KANAN ka luhur.
Candak potongan LEG CUFF jeung melu dina satengah lengthways.
Ngagampangkeun LEG CUFF kana armhole, ngadistribusikaeun eta merata sabudeureun. Pin jeung stitch.
Rengse kelim ku overlocker atanapi zig zag stitch.
Repeat Steps 1 jeung 2 for the other armhole.
LENGKAH 3:
Kalayan garment SALAH SISI kaluar, cocog tunjangan kelim samping mastikeun align CUFFS suku.
Pin na stitch tunjangan kelim dina dua sisi. Rengse kelim sakumaha saméméhna.
LENGKAH 4:
Lipetkeun SLEEVE CUFF dina satengah sapanjang lebarna.
Gampang kana tungtung LENGAN. Pin jeung stitch.
LENGKAH 5:
Buka sisi katuhu hareup jeung tukang ka arah anjeun.
Teundeun SISI KANAN LEUNGGUNG babarengan jeung HARAPAN jeung DEUI. Pin ka titik underarm tina seams samping jeung puseur sirah leungeun baju kana titik taktak. Ngagampangkeun sésana dina.
Jahit sareng rengsekeun sangu kelim nganggo jahitan zig zag atanapi overlocker.
LENGKAH 6:
Kalayan garment SALAH SISI kaluar, iklaskeun SISI KUNJUNGAN HARAPAN jeung DEUI.
panitik, jahit, motong sareng rengse ti CUFF leungeun baju ka hem sapanjang kelim samping.
Clip almost up to the seam allowance at the underarm point to allow the garment to lay flat once turned. If you have finished the seam allowance close to the body this may not be necessary.
LENGKAH 7:
Candak HEM CUFF sareng NECKLINE CUFF (refer to Step 10 if you are using the NECK WARMER CUFF or Step 13 for HOOD) jeung melu dina satengah SISI KANAN babarengan pikeun nyieun loop kontinyu. Pin na stitch tunjangan kelim pondok.
LENGKAH 8:
Larapkeun HEM CUFF ka hem garment, SISI katuhu babarengan.
Gampang sabudeureun merata lajeng pin na stitch di tempat.
Rengse dina sangu kelim.
LENGKAH 9:
USING THE NECKLINE CUFF – SKIP TO STEP 10 FOR NECK WARMER, LENGKAH 13 FOR HOOD.
Fold the NECKLINE CUFF in half matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, SISI katuhu babarengan.
Pin na stitch di tempat sarta rengse sangu kelim.
LENGKAH 10:
USING THE NECK WARMER
Fold the NECK WARMER CUFF in half along the centre fold line.
LENGKAH 11:
Sew the raw edges together.
LENGKAH 12:
Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.
Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. Pin jeung stitch.
LENGKAH 13:
Iklas potongan HOOD SISI KANAN babarengan. Pin na stitch sabudeureun garis kelim luar.
LENGKAH 14:
Candak CUFF HOOD, melu eta dina satengah cocog tunjangan kelim pangpanjangna. Pin na stitch kana bukaan HOOD.
LENGKAH 15:
Tumpang tindih dua tunjangan kelim tina HOOD CUFF jadi hiji di tukangeun lianna. Larapkeun tengah CUFF HOOD ka tengah hareup garmen.
Cocogkeun tengah tukang HOOD sareng tukang tengah baju. Pin na stitch sabudeureun.