Joey Tee Tutorial
[print friendly]
Gambar nu sadia di download pola.
[wc_accordion collapse=”0″ leaveopen=”0″ class=”” layout=”box”]
[wc_accordion_section title=”Step 1″]
Cut out all pieces marking any balance or ease marks. This garment will have reasonable stretch to it so it is recommended to use zig-zag stitch wherever a seam is constructed.
Lay the front edge of the SLEEVE armhole to the FRONT armhole, SISI katuhu babarengan.
Pin and stitch the seam allowance.
Repeat for the other FRONT side.
[/wc_accordion_section]
[wc_accordion_section title=”Step 2″]
Lay the back SLEEVE armhole to the BACK armhole RIGHT SIDES together.
Pin and stitch the seam allowance.
Repeat for the other BACK side.
Finish all sleeve seam allowances using an overlocker or zig-zag stitch. Trim if necessary.
[/wc_accordion_section]
[wc_accordion_section title=”Step 3″]
Kalayan garment SALAH SISI kaluar, align the side seams and SLEEVE seams.
Pin and stitch continuously from SLEEVE cuff to the garment hem.
Finish the seam allowances as before.
[/wc_accordion_section]
[wc_accordion_section title=”Step 4″]
TANPA KUDUNG:
Fold in half the NECK CUFF RIGHT SIDES together and sew the short seam allowance.
Fold the NECK CUFF in half so that the raw edges meet.
Ease around the garment neckline. Pin na stitch di tempat.
For HOOD see Steps 5-7.
[/wc_accordion_section]
[wc_accordion_section title=”Step 5″]
WILUJENG:
Iklas dua lembar tiung katuhu sisi babarengan. Pin na stitch pusat deui sangu kelim. Motong na rengse dina sangu kelim kalawan zig-zag stitch atanapi hiji stitch overlocking.
[/wc_accordion_section]
[wc_accordion_section title=”Step 6″]
Complete the hood by folding the front opening seam allowance back 0.75mm then again 0.75mm. Pin na stitch di tempat nepi ka rengse kelim nu.
[/wc_accordion_section]
[wc_accordion_section title=”Step 7″]
Ease the neckline of the HOOD on to the garment neckline. Overlap the centre front edges of the HOOD by 1.5cm onto each other.
Pin jeung stitch. Rengse dina sangu kelim.
You may like to top-stitch the seam allowance flat towards the bottom of the garment.
[/wc_accordion_section]
[wc_accordion_section title=”Step 8″]
Complete the garment hem and cuffs by finishing the seam allowance, then folding it back 1.5cm and top-stitching to secure.
Mencet sadayana seams.
[/wc_accordion_section]
[/wc_accordion]