STEP 1:
Tafadhali soma maelezo ya uchapishaji!
Create the welt pockets on the FRONT pieces. Follow the welt pocket tutorial included or find it here: https://www.the-tailoress.com/product/welt-pockets-pdf-sewing-pattern/
STEP 2:
Pamoja na mahusiano ya pande WRONG up, mara nyuma 1cm ya upande mmoja. Mara nyuma 5mm pamoja wote wa pande muda mrefu na vyombo vya habari. Kisha mara TIE katika nusu kuficha pembe ghafi awali zilikuwa katika. Stitch in place.
upande mmoja utabaki makali ghafi, hii itakuwa kushonwa katika vazi mshono upande.
STEP 3:
Mara COLLAR HAKI pande pamoja lengthways. Kushona chini ya gongo posho pamoja. Cha picha ya kona na trim gongo posho. Pinda kulia pande nje na vyombo vya habari.
STEP 4:
Weka mbele na nyuma kulia pande pamoja. Pin na kushona bega mshono posho.
Kurudia kwa upande mwingine.
STEP 5:
Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK pieces. Matching the underarm points.
Pin and stitch the seam allowance between the underarm points.
Vyombo vya habari gongo wazi. Repeat for the other SLEEVE.
STEP 6:
Pamoja na vazi WRONG pande nje, match the SLEEVE seam allowances and the side seams of the FRONT and BACK.
Insert the TIE at the tie insertion point of the side seam on one side. Insert it between the FRONT and BACK so that it is visible on the RIGHT SIDE of the garment once sewn.
Pin and stitch the SLEEVE from the underarm point at the sleeve opening, around the curve to the lowest inside point of the SLEEVE. Finish the seam allowances by clipping the curved edge and trimming to 7mm.
Pin and stitch the side seam from the underarm point to the hemline. Turn RIGHT SIDES out and press the seams allowances.
STEP 7:
With the RIGHT SIDES out, pin the COLLAR around the centre front and neckline of the FRONT and BACK.
Pin the remaining TIE at the tie insertion point on the opposite side to where the side seam TIE is placed, on the centre FRONT.
Stitch just within the seam allowance.
STEP 8:
Follow Steps 4-6 to create the lining, ignoring references to the TIES and there’s no need to clip the SLEEVE seam allowance.
STEP 9:
Arrange the lining RIGHT SIDES together with the main garment. Pin and stitch around the centre front opening, including the COLLAR.
Stitch in place.
Pinda kulia pande nje na vyombo vya habari.
STEP 10:
Turn back the seam allowances of the SLEEVE at both openings. Secure with small hand stitches. Press.
Turn up the main garment hemline 1 inch / 2.5cms and press. Turn up the lining hemline the same amount and pin. Sew together using hem stitch.