HATUA 1:
1.5cm posho mshono pamoja
Kata vipande vyote muundo. The CUFFS will sew better if made from jersey.
Fold the LEG CUFFS in half lengthways. Match the raw edges of one with those of FRONT 1, Pande haki pamoja.
Pin na kushona katika nafasi. Rudia kwa MBELE 2.
Matumizi Zig zag kushona au nyingine kunyoosha kushona katika mradi huu. Pia kuhakikisha kutumia ballpoint Jersey mashine sindano.
HATUA 2:
With FRONT 1 over FRONT 2 with both parts RIGHT SIDES up, align either end of the cuffs on FRONT 1 with the markers on FRONT 2.
Pin katika nafasi.
HATUA 3:
Lay FRONT 1 & 2 RIGHT SIDES together with the BACK. Pin the side seam allowances together, removing the pins at the join of FRONT 1 & 2 and replacing to secure through all pieces.
Kushona mahali. Repeat for the opposite side.
HATUA 4:
Take the HEM CUFF and NECKLINE CUFF (if using) and fold in half RIGHT SIDES together to create a continuous loop. Bana na kushona short gongo posho.
Skip to step 10 for neck warmer or step 13 for hood.
HATUA 5:
Fold the NECKLINE CUFF in half matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, Pande haki pamoja.
Pin and stitch in place and finish the seam allowance.
HATUA 6:
Weka HEM cuff vazi pindo, Pande haki pamoja.
Kupunguza karibu sawasawa kisha kubandika na kushona katika nafasi.
Kumaliza posho mshono.
HATUA 7:
USING THE NECK WARMER
Fold the NECK WARMER CUFF in half along the centre fold line.
HATUA 8:
Sew the raw edges together.
HATUA 9:
Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.
Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. Pin na kushona.
HATUA 10:
Weka HOOD vipande HAKI pande pamoja. Pin and stitch around the outside seam line.
HATUA 11:
Take the HOOD CUFF, fold it in half matching the longest seam allowances. Pin and stitch to the HOOD opening.
HATUA 12:
Overlap the two seam allowances of the HOOD CUFF so one is behind the other. Apply the centre of the HOOD CUFF to the centre front of the garment.
Match the centre back of the HOOD with the centre back of the garment. Pin and stitch around.