Щадам 1:
Агар шумо нақшаи HOOD-ро истифода набаред, ин қадамро гузаред:
Қисмҳои ХУД-ро дар паҳлӯи рости якҷоя ҷойгир кунед. Pin and stitch around the center back seam allowance.
Ensure to use a ballpoint jersey machine needle.
Щадам 2:
Take the HEM CUFF, fold it in half lengthways and stitch the seam allowance to form a complete loop.
If you are not adding the hood, repeat this step for the NECKLINE CUFF.
Щадам 3:
СLEVE CUFF-ро дар баробари паҳнояш ба ду баробар пӯшед.
Ease onto the end of the SLEEVE. Pin ва stitch.
Щадам 4:
ҚАДАМ-ро такрор кунед 3 for the HOOD CUFF.
Skip this Step if you are not using the HOOD.
Щадам 5:
Match the shoulder seams of the BACK and FRONT RIGHT SIDES together.
Дар ҷои худ часпонед ва дӯхтед.
Щадам 6:
Open up the FRONT and BACK RIGHT SIDES towards you.
Ease the SLEEVE head on to the arm opening. Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK. Pin to the underarm points of the side seams and the center of the SLEEVE head to the shoulder point. Ease the rest in.
Stitch and finish the seam allowance using zig zag stitch or an overlocker.
Щадам 7:
Бо либоси ТАРАФҲОИ ГАДӢ берун, ПЕШ ВА ПУШТ ТАРАФИ РОСТро якҷоя гузоред.
пайвандак, дӯзандагӣ, бурида ва аз CUFF остин то домани дар баробари дарз тараф.
Щадам 8:
WITH HOOD:
Take the HOOD. Overlap CUFF sections onto each other.
Match center front and center back points of the HOOD to the FRONT and BACK sections. Do this by folding the garment in half and adding pins to mark the points. Repeat for the HOOD then match the pins together.
Дар ҷои худ часпонед ва дӯхтед.
WITHOUT HOOD:
Apply the NECKLINE CUFF by folding in half along the width then easing around the neckline. Дар ҷои худ часпонед ва дӯхтед.
Щадам 9:
Apply the HEM CUFF by folding in half along the width and easing around the hemline. Дар ҷои худ часпонед ва дӯхтед.