Щадам 1:
Бурида аз ҳама пораҳои намунае.
With the FRONT and BACK TOP pieces RIGHT SIDES together, pin and stitch the side seam allowances.
Щадам 2:
Apply bias binding to the centre back and armhole seam allowances.
pin and stitch binding RIGHT SIDES together.
trim seam allowance to the finished binding width. Clip armhole seam allowance.
Press the seam.
Finish the binding by turning the un-sewn raw edge to the inside and matching the fold to the stitch line. Top stitch in place.
Щадам 3:
Fold down the necklines of the FRONT and BACK TOP pieces 5mm then again 20mm toward the WRONG SIDE. Topstitch in place.
Щадам 4:
Lay WAISTBAND 1 RIGHT SIDES together with WAISTBAND 2. Sew the seam allowances up to the markers. Fold and press the WAISTBAND in half lengthways, ready to apply.
Щадам 5:
Match the centre back of the TOP to the centre back of the WAISTBAND. Repeat for the centre fronts. Finish pinning around the WAISTBAND.
Pin and stitch the seam allowance.
Щадам 6:
Дар якҷоягӣ бо ҳам дар паҳлӯи дарозии худ пӯшед. Дарозии дарозии дар байни байни. Барои таъмини сатр ба галста дар боло нигоҳ кунед. PIN ва SEAL-ро дӯхтед. Бодиққат сатрро кашед.
Агар шумо пармакунии ҳалқа дошта бошед:
Гумро дар давоми нисфи дарозӣ пӯшонед. Рӯй ҷониб ДУРУСТ аз истифодаи Turner дарз.
Finish the TIE by pressing it and turning the raw ends under twice and use small stitches to secure. Insert into the WAISTBAND to complete.
Агар шумо замимае дошта бошед, шумо метавонед онро бо дӯхтани равобити худ истифода баред.
Щадам 7:
FOR THE JUMPSUIT OR DRESS
Follow the tutorial to make the SKIRT or TROUSERS.
Match the centre front, back and side seams of the TOP and SKIRT or TROUSER RIGHT SIDES together.
Pin ва stitch. Дарозии дарзро анҷом диҳед.