Eloise Top & Dress Tutorial
[printfriendly]
Mga imahe ay magagamit sa ang pag-download na pattern.
[wc_accordion collapse=”0″ leaveopen=”0″ klase=”” layout=”kahon”]
[wc_accordion_section title=”Step 1″]
1.5cm pinagtahian allowance kasama
Gupitin ang lahat ng mga piraso pattern.
Place the SHOULDER piece RIGHT SIDES together with the SHOULDER LINING.
Pin and stitch around the neckline and centre backs and along the shoulder seam allowances.
Clip and trim the curved seam allowances to allow them to lie flat once turned to the RIGHT SIDE.
Lumiko kanang gilid out at pindutin ang.
[/wc_accordion_section]
[wc_accordion_section title=”Step 2″]
Using a hand stitch or using the largest stitch on your machine, sew a line of straight stitch between the GATHER marks on the BACK piece. Sew midway along the seam allowance
Loop the thread in a figure of eight around a pin at one end then gently pull the thread to form the gathers. When you have gathered enough so the fabric fits between the GATHER marks on the SHOULDER piece, secure in a figure of eight around another pin.
Repeat for the FRONT.
[/wc_accordion_section]
[wc_accordion_section title=”Step 3″]
Na kalakip ng balabal MALING panig out, align the FRONT and BACK side seam allowances.
aspile, manahi at tapusin.
pindutin.
[/wc_accordion_section]
[wc_accordion_section title=”Step 4″]
Tapusin ang SIDE underarm seksyon. Ang diagram sa itaas ay nagpapakita ng mga paraan ng paggamit ng isang pasadyang cut strip ng bias. Kung gumagamit ka ng handa bias mangyaring iakma upang umangkop sa iyong bias lapad. Para sa mga custom bias gumawa ng iyo tantiya. 4.5cm x 30cm long, you will need 2.
I-pin ang bias strip sa lugar sa kahabaan ng kilikili seksyon. Tahiin ng 1.5cm pinagtahian allowance.
Trim ang pinagtahian allowance na tungkol 7.5mm.
Tiklop sa loob ng panlabas na gilid ng bias sa pamamagitan ng 1cm.
Tiklupin ang bias strip sa ibabaw at sa paligid ng raw gilid upang itago. Pin sa lugar sa maling gilid. Gumamit ng hand stitch tulad ng slip stitch sa mga secure na ang bias sa lugar o topstitch malapit sa seam line.
[/wc_accordion_section]
[wc_accordion_section title=”Step 5″]
Lay the FRONT and SHOULDER RIGHT SIDES together.
Pin at stitch. Remove the hand stitching that formed the gathers originally.
Finish the seam allowance using zig-zag stitch or an overlocker.
[/wc_accordion_section]
[wc_accordion_section title=”Step 6″]
Ulitin HAKBANG 5 for the BACK and SHOULDER.
The SHOULDER centre back pieces will meet at the centre back of the BACK.
[/wc_accordion_section]
[wc_accordion_section title=”Step 7″]
Complete the garment by adding a hook and eye or loop and button at the top centre back.
Finish the hem with a hemmer foot or create a rolled hem by hand.
[/wc_accordion_section]
[/wc_accordion]
Download the Eloise Top & Dress PDF Sewing Pattern here