HAKBANG 1:
Gupitin ang lahat ng mga piraso ng pattern.
With the TOP pieces RIGHT SIDES together, pin and stitch the side seam allowances.
Finish the seam allowance of the top edge using an overlocking stitch or zig-zag. Fold back the top edge 2.5cm and press.
Mark and fold the pleats – making sure to mark with the side seams in the centre, stitch and press.
HAKBANG 2:
Match each front pleat to its corresponding back pleat.
Sew across the join using a tight zig zag stitch.
HAKBANG 3:
Prepare the SHOULDER BINDING by folding and pressing the seam allowances to the WRONG SIDE.
Prepare the TOP shoulders by folding the fabric downwards at an angle toward the WRONG SIDE, creating more pleats.
HAKBANG 4:
Finish the shoulder by encasing the TOP shoulders inside the SHOULDER BINDING.
Secure the edges of the SHOULDER BINDING with small hand stitches to secure in place.
HAKBANG 5:
Lay WAISTBAND 1 RIGHT SIDES kasama ang WAISTBAND 2. Tahiin ang mga allowance ng tahi hanggang sa mga marker. Tiklupin at pindutin ang WAISTBAND sa kalahating pahaba, handang mag-apply.
HAKBANG 6:
Gather the waistline of the TOP to fit the WAISTBAND.
An easy way to do this is to sew a row of straight stitch on the longest stitch setting, wrap one thread end around a needle then gently pull the other end to gather. Secure the second thread end to the pin.
Pin and stitch the WAISTBAND to the TOP matching the centre front and back points. If you intend to make the dress or jumpsuit, sew just within the 1.5cm seam allowance.
HAKBANG 7:
PARA SA JUMPSUIT O DRESS
Follow the tutorial to make the SKIRT or TROUSERS.
Itugma ang gitnang harap, back and side seams of the TOP and SKIRT or TROUSER RIGHT SIDES together.
Pin at stitch. Tapusin ang pinagtahian allowance.
HAKBANG 8:
I-fold ang TIE sa kalahati kasama ang haba nito RIGHT SIDES together. Maglagay ng haba ng string sa pagitan. Tumahi sa itaas upang ma-secure ang string sa TIE. I-pin at tahiin ang seam allowance. Maingat na hilahin ang string na pinipihit ang TIE RIGHT SIDES out.
Kung mayroon kang loop turner:
Tiklupin ang TIE sa kalahating pahaba at tahiin ang seam allowance. Lumiko sa KARAPATAN SIDES gamit ang isang seam turner.
Tapusin ang TIE sa pamamagitan ng pagpindot dito at pagpihit ng mga hilaw na dulo sa ilalim ng dalawang beses at gumamit ng maliliit na tahi upang ma-secure. Ipasok sa WAISTBAND para makumpleto.
Kung mayroon kang binder attachment maaari mo itong gamitin gamit ang zig-zag stitch para gawin ang iyong mga tali.