HAKBANG 1:
Match two TOP pieces RIGHT SIDES together lining up the pleats.
Fold the pleats through both layers together and pin in place.
Pin and stitch the shoulder seam allowance. pindutin.
Repeat for the remaining two TOP pieces.
HAKBANG 2:
Open up the TOP pieces RIGHT SIDE up.
Apply bias binding to the centre back and armhole seam allowances.
pin and stitch binding RIGHT SIDES together.
trim seam allowance to the finished binding width. Clip armhole seam allowance.
Press the seam.
Finish the binding by turning the un-sewn raw edge to the inside and matching the fold to the stitch line. Top stitch in place.
HAKBANG 3:
With the two TOP pieces RIGHT SIDES together, pin, stitch and finish the side seam allowance.
Repeat for the other two TOP pieces.
HAKBANG 4:
Lay WAISTBAND 1 RIGHT SIDES kasama ang WAISTBAND 2. Tahiin ang mga allowance ng tahi hanggang sa mga marker. Tiklupin at pindutin ang WAISTBAND sa kalahating pahaba, handang mag-apply.
HAKBANG 5:
Follow the tutorial for the skirt or trousers if you are wanting to make the dress or jumpsuit.
Match the waistlines of the TOP pieces together. Alternate how you overlap them, so if the lefthand front piece is in front of the righthand front piece, the lefthand back piece is behind the righthand back piece.
TOP
Match the centre front and back of the TOP to the WAISTBAND. Pin at tusok sa lugar. Finish the seam allowance and press.
DRESS/JUMPSUIT
Arrange the TOP sections RIGHT SIDES together with the TROUSERS and WAISTBAND. Match side seams and centre front and back points.
Pin at tusok sa lugar. Finish the seam allowance and press.
HAKBANG 6:
I-fold ang TIE sa kalahati kasama ang haba nito RIGHT SIDES together. Maglagay ng haba ng string sa pagitan. Tumahi sa itaas upang ma-secure ang string sa TIE. I-pin at tahiin ang seam allowance. Maingat na hilahin ang string na pinipihit ang TIE RIGHT SIDES out.
Kung mayroon kang loop turner:
Tiklupin ang TIE sa kalahating pahaba at tahiin ang seam allowance. Lumiko sa KARAPATAN SIDES gamit ang isang seam turner.
Tapusin ang TIE sa pamamagitan ng pagpindot dito at pagpihit ng mga hilaw na dulo sa ilalim ng dalawang beses at gumamit ng maliliit na tahi upang ma-secure. Ipasok sa WAISTBAND para makumpleto.
Kung mayroon kang binder attachment maaari mo itong gamitin gamit ang zig-zag stitch para gawin ang iyong mga tali.