Gabriella Jumpsuit Eğitimi

[printfriendly]
Görüntüler desen indirme mevcuttur.
[wc_accordion collapse=”0″ leaveopen=”0″ sınıf=”” layout=”box”]
[wc_accordion_section title=”Step 1″]
1.5cm dikiş yardımı dahildir
Tüm desen parçalarını kesip.
Fold the TIE LOOPS in half as shown on the pattern piece. Stitch and cut along the CUTLINE.
Fold the WAISTBAND LOOP in half as shown on the pattern piece and stitch.
Turn the TIE LOOPS and WAISTBAND LOOP RIGHT SIDES OUT. Basın.
[/wc_accordion_section]
[wc_accordion_section title=”Step 2″]
GERİ birlikte ÖN SAĞ YÜZLER Lay.
Pin and stitch the side seam allowances.
Finish the seam allowance using zig-zags stitch or an overlocker.
[/wc_accordion_section]
[wc_accordion_section title=”Step 3″]
Finish the underarm and neckline sections. Yukarıdaki diyagram önyargı özel kesim şerit kullanma yöntemini gösterir. Eğer hazırlanan önyargı kullanıyorsanız, önyargı genişliğini uyacak şekilde adapte lütfen. Özel önyargı için yakl aynısını yap. 4.5cm x 50cm long for the armholes and 4.5cm x 30cm long for the neckline seam allowances.
Koltukaltı kesiti boyunca yerinde önyargı şerit pin. Bir 1.5cm dikiş payı Dikiş.
yaklaşık 7.5mm dikiş parası Trim.
1cm tarafından önyargı dış kenarını katlayın.
üzerinde önyargı şeridi katlayın ve ham kenarı etrafında gizlemek için. Yanlış tarafında yer Pim. yer veya dikiş hattına yakın Topstitch önyargı sabitlemek için böyle kayma dikiş olarak bir el dikiş kullanın.
[/wc_accordion_section]
[wc_accordion_section title=”Step 4″]
Fold the TIE LOOPS in half and align the raw edges with the unfinished shoulders of the garment.
Pim ve dikiş. Top-stitch the seam allowances flat.
[/wc_accordion_section]
[wc_accordion_section title=”Step 5″]
Take FRONT and BACK TROUSER pieces and lay RIGHT SIDES together.
Toplu iğne, dikiş ve yan dikiş paylarını bitirmek.
diğer taraf için de tekrarlayın.
[/wc_accordion_section]
[wc_accordion_section title=”Step 6″]
Insert one TROUSER into another, Birlikte SAĞ TARAFI.
Align the crotch seam allowance.
Toplu iğne, stitch and finish beginning at either centre front or back and continuing to the opposite center.
[/wc_accordion_section]
[wc_accordion_section title=”Step 7″]
Take the TROUSER CUFFS and ELASTIC WAISTBAND.
Fold in half lengthways and sew the seam allowances.
dışarı SAĞ YÜZLER çevirin.
Prepare the lengths of elastic by overlapping the seam allowances and stitching to create rounds.
[/wc_accordion_section]
[wc_accordion_section title=”Step 8″]
Fold the CUFFS in half so as to match the raw edges.
Insert the cuff elastic between the fabric layers, concealing it.
Align the raw edges of the CUFF to the end of the TROUSER leg. yerine pim ve dikiş. daha önce olduğu gibi dikiş payını bitir.
Repeat for the opposite leg.
[/wc_accordion_section]
[wc_accordion_section title=”Step 9″]
Fold the ELASTIC WAISTBAND in half, Ham kenarları eşleşen.
Insert the waistband elastic between the layers.
Pin and stitch the ELASTIC WAISTBAND RIGHT SIDES together with the TROUSER waistline.
Stitch within the seam allowance to allow this row of stitches to be hidden once the FRONT and BACK are sewn on.
[/wc_accordion_section]
[wc_accordion_section title=”Step 10″]
Turn the FRONT and BACK WRONG SIDES out.
Match the waistline to that of the TROUSER and ELASTIC WAISTBAND.
Fold the WAISTBAND LOOP in half and insert the raw edges into the seam allowance between the upper garment and the TROUSER at one of the side seams. (Choose the opposite side to that which you want your tie to hang).
Toplu iğne, dikiş ve dikiş payı bitirmek.
[/wc_accordion_section]
[wc_accordion_section title=”Step 11″]
Fold the WAISTBAND in half along its width RIGHT SIDES together. Sew the seam allowance, sew one end closed but leave one open.
Turn the WAISTBAND RIGHT SIDES out through the open end.
Fold back the seam allowance of the open end and sew closed using a small hand stitch such as whip stitch.
Complete the garment by creating the TIES (follow the TIE & KAYIŞ ÖĞRETICISI) and inserting into the TIE LOOPS.
[/wc_accordion_section]
[/wc_accordion]
Download the Gabriella Jumpsuit PDF Sewing Pattern here