Farklı kumaşlar için pek çok farklı dikişler vardır, yüzey ve giysiler. Sen hemen size yetenekli iseniz pimleri olmadan bir giysiyi dikiş atabilir, ancak çoğu durumda işaretçilerine kullanılması tavsiye edilir.
doğru dikiş için iki parçayı birbirine tutturmak için, begin by inserting a pin at right angles to the seam line at each end. Ensure you are pinning on a flat even surface. Next pin any balance marks or notches before pinning the remainder of the fabric together.
To pin an eased area of fabric, begin by keeping the part to be eased on top. Roll the fabric over your finger and pin at small intervals. This should result in a small amount of fullness within each pinned section. If there is a larger amount of fabric to be eased, then you should stitch one to two rows within the seam allowance, of small straight stitches and then gather the fabric to the the required size. Distribute the gathers evenly to avoid a puckered effect once stitched.
To pin a crossed seam, ensure the seam lines on the right side of the fabric match and pin together. Then pin the seam allowance from each fabric piece together also to ensure they don’t get folded during stitching.
[wc_row]
[wc_sütun boyutu=”one-third” konum=”Birinci”]
Trimming Seams
To reduce bulk.
[/wc_column]
[wc_sütun boyutu=”one-third”]
Grading Seams
To reduce bulk and allow seams to lay flat.
[/wc_column]
[wc_sütun boyutu=”one-third” konum=”son”]
Clipping Seams
To allow seams to lay flat in a curve and not cause outer fabric to pucker or strain.
[/wc_column]
[/wc_row]