Lay the Back and Front interfacing onto the Wrong Side of the corresponding main garment pieces.
If you are using iron-on interfacing you can now iron it on. If you are using the sew-in variety simply pin in place.
Pin the Sleeve RS together with the main garment along the armscye.
Pin the ends first then the centre to the shoulder seam. Gently ease the gathered sleeve head to fit between the ease marks off the bodice. Gather more if necessary.
Pin in place and stitch the seam allowance, ensuring to stitch between the two hand sewn gathered stitch lines.
Place lining inside the main garment RS together.
Stitch along the neckline, from the back around the front and along the back again.
Clip and trim the seam allowances.
Stitch from the lower edge of the back neckline and around the open back seamline. Repeat clipping and trimming the seam allowances for the back opening seam allowances.
Turn the garment RS out so that the seams are hidden internally. Press the neckline and open back seams.
Turn the garment inside out so the lining is facing you.
Turn over the cuff seam allowance and press.
Turn over the cuff at the Cuff Foldline shown on the pattern and press.
Top stitch approx. 3cm from the cuff edge.
To complete the centre back seam, separate the lining from the main garment fabric from the lowest point of the open back v-shape.
Pin and stitch from the hem of the lining all the way to the hem of the main garment fabric.
Notch the seam allowance at the point of intersection between the lining and main garment.
Purchase the Barbara Tunic PDF Sewing Pattern here