КРОК 1:
Виріжте всі частини шаблонів.
Lay the main fabric and lining fabric RIGHT SIDES together of the bottoms.
Pin together. Stitch using zig-zag stitch or a stretch stitch on an overlocker.
Ensure to leave open the section for turning right sides out later.
Обрізка припуски на шов.
КРОК 2:
Поверніть праві частини з.
Fold the seam allowances of the open section to the inside and sew using small whip stitches by hand.
КРОК 3:
Fold the TIE LOOPS in half following the dashed line on the pattern piece.
пришийте припуск.
Поверніть праву сторони з лінією шва до внутрішнього центру.
КРОК 4:
Lay the FRONT TOP main fabric and lining fabric RIGHT SIDES.
Pin together. стібок.
Ensure to leave open the section for turning right sides out later and also the openings for the TIE LOOPS.
Обрізка припуски на шов.
КРОК 5:
Fold the TIE LOOPS in half lengthways matching the raw seam allowances. Insert the TIE LOOPS into the FRONT of the swimsuit, між внутрішньою і зовнішньою тканиною.
Pin and stitch the seam allowances.
КРОК 6:
Pull the swimsuit RIGHT SIDES out through the open sections on the top and bottoms.
Скласти припуск отвори всередині. Закріпити за допомогою невеликої, whip stitches.
КРОК 7:
There are 3 options for completing the TIES.
Option 1: Fold the TIE in half along its length RIGHT SIDES together. Place a length of string in-between. Sew across the top to secure the string to the TIE. Pin and sew the seam allowance. Carefully pull the string turning the TIE RIGHT SIDES out.
Option 2: If you have a loop turner:
Fold the TIE in half lengthways and sew the seam allowance. Поверніть праву сторони за допомогою шва токар.
Option 3: If you have a binder attachment you can use it with zig-zag stitch to create your ties.
Finish the TIE by turning the raw ends under twice and use small stitches to secure or by making a knot at each end. Insert one into each TIE LOOP to complete.